- Joined
- Apr 12, 2009
Overclocked to 3.9 ghz UD3R chipset, 1.25 VCore (bios) using a push pull air cooled setup via the cooler master hyper 212 HSF. I made a mistake with the HSF and should have gotten the sunbeam contact freezer or xigmatek 1283 ugh, too late now though.
Temps are as follows:
Idle @ around 31C
Prime95 Blend brings core 0 to about 54C
Intel Burn test brings it up to around 60C after 5 iterations
Core 0 always runs about 3 degrees hotter than 1 2 3.
Question is can I leave things the way they are now and expect the CPU to give me 2+ solid years of use?
Temps are as follows:
Idle @ around 31C
Prime95 Blend brings core 0 to about 54C
Intel Burn test brings it up to around 60C after 5 iterations
Core 0 always runs about 3 degrees hotter than 1 2 3.
Question is can I leave things the way they are now and expect the CPU to give me 2+ solid years of use?