- Joined
- Sep 20, 2007
InnoGF8800GT-512MB & The Thermalright HR-03GT GPU Cooler
The Thermalright HR-03GT Parcel arrives from the USA ,
(Thanks to MaVoK,[OCForums] for his speedy delivery)
The Thermalright HR-03GT GPU Cooler unpacked on the Table
The Thermalright HR-03GT GPU Cooler Contents and Mounting Hardware
and Ram Sinks
The Thermalright HR-03GT GPU Cooler, closer look
Now Lets Take this GPU out for a Makeover,,,
My Inno -GF8800GT 512MB Graphics Card Opened up,
The First thing I notest with this one, compaired to others I have seen around is the fact the Cooling pads on the Heatsink are not half stuck to Ram Chips.
This is due to the Silica Release pads used in the Inno GPU,s, wasnt all that dusty either considering had it for just over a year.
Time to now Clean of the Ramchips and VRM,s for the installation of the Ram
Heatsinks.
Also need to clean and re-apply Thermaltape to Heatsinks
Cleaned all the Ram Cips and VRM,s with Acetone and also washed off with Isopropyl Alchohol
Ramsinks all on and made some Heatsinks from an old AGP GPU heatsink, cut down to size,
Closer View of Ram Sinks and VRM Heatsinks
First attempt the Ramsinks fell off after 20mins, so trying a different Thermaltape.
The Thermalright HR-03GT Parcel arrives from the USA ,
(Thanks to MaVoK,[OCForums] for his speedy delivery)
The Thermalright HR-03GT GPU Cooler unpacked on the Table
The Thermalright HR-03GT GPU Cooler Contents and Mounting Hardware
and Ram Sinks
The Thermalright HR-03GT GPU Cooler, closer look
Now Lets Take this GPU out for a Makeover,,,
My Inno -GF8800GT 512MB Graphics Card Opened up,
The First thing I notest with this one, compaired to others I have seen around is the fact the Cooling pads on the Heatsink are not half stuck to Ram Chips.
This is due to the Silica Release pads used in the Inno GPU,s, wasnt all that dusty either considering had it for just over a year.
Time to now Clean of the Ramchips and VRM,s for the installation of the Ram
Heatsinks.
Also need to clean and re-apply Thermaltape to Heatsinks
Cleaned all the Ram Cips and VRM,s with Acetone and also washed off with Isopropyl Alchohol
Ramsinks all on and made some Heatsinks from an old AGP GPU heatsink, cut down to size,
Closer View of Ram Sinks and VRM Heatsinks
First attempt the Ramsinks fell off after 20mins, so trying a different Thermaltape.
Last edited: