- Joined
- Jun 20, 2009
- Location
- New Mexico
I've tried searching, but it turned up Nada..
oh yeah, I'm new here.. Came over from Tech-Forums.
What I've got:
ANYWAY...
I've been trying to hit a Prime Stable higher clock than what I have btu I haven't gotten it past a Bootable 3.8g.
I'd like to be able to hit 4.0G and have it be as stable as I can get it..
Here were my BIOS Settings for What I'm running now @ 3.64g. Not Prime Stable, but I was Playign Crysis warhead last week and the Card kept freezing up on me so I dropped it down to 3,5g on just the Mult.
I don't know a great Deal about OCing, just that if you step your CPU up, you need to step up the other settings to not Waste cpu clock cycles.
TIA!
oh yeah, I'm new here.. Came over from Tech-Forums.
What I've got:
Vista 32b
PII 940
M4A78 Pro
Ultra X3 1000w PSU
8G OCZ 1066 RAM @ 5-5-5-15 (I don't know anything about RAM Timings) I dropped 4 gigs out during clocking.
Dual WDC 80g in RAID 0 Stripe
Liquid cooled CPU and HD4870 1g (Single Card for now)
-DTek Fusion CPU block
-Swiftek GPU Block, and Pump
-Single MCR 220 Fan-wich Rad (for now, need a 320)
-XSPC Pump top and Rez.
ANYWAY...
I've been trying to hit a Prime Stable higher clock than what I have btu I haven't gotten it past a Bootable 3.8g.
I'd like to be able to hit 4.0G and have it be as stable as I can get it..
Here were my BIOS Settings for What I'm running now @ 3.64g. Not Prime Stable, but I was Playign Crysis warhead last week and the Card kept freezing up on me so I dropped it down to 3,5g on just the Mult.
CPU Mult @ 17.50
FSB @ 215
NB Freq @ 102
NB mult @ 11.00x
HT Link Speed @ 1.2G
CPU Volt @ 1.475v
CPU/NB Volt @ AUTO
CPU VDDA Volt @ AUTO
DRAM Volt @ 2.17 (works, set for the sticks)
HT Volt @ 1.30v
NB Voltage @ 1.20
NB 1.8v @ AUTO
SB Volt @ AUTO
CPU Spread Spectrum @ Enabled
PCIE Spread Spectrum @ Enabled
I don't know a great Deal about OCing, just that if you step your CPU up, you need to step up the other settings to not Waste cpu clock cycles.
TIA!
Last edited: