- Joined
- Mar 13, 2006
Ok I am tired of having to hunt around the web trying to get the info for different portions of the Perc 5i cards.
www.wiredzone.com
http://www.atacom.com/program/print_html_new.cgi?Pagecode=SEARCH_ALL&Item_code=CABR_SUPE_10_11
http://www.cross-mark.com/50cm-serial-attached-scsisas-sff8484-sata-cable-p-842.html
Both have the cables for a VERY nice price (2-3 of them for the price of one at Microcenter). The cables I linked are the straight connector cables which MOST people with a hotswap or backplane will need.
You can get the angle connectors (I have 2 that will likely sit for a good while).
The battery so far I have seen on Ebay for the best price (figure on average to the US it will be about 30-40 for the cable and battery.)
The memory is tricky it seems, anyone with a Perc 5i PLEASE list your modules specs (i.e. DDR2 400 single bank ECC REG and model no: MT9HTF6472Y-40EB2)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134287
Verified memory that works for the Perc5i
Links to threads that contain the info but are EXTREMELY spread out.
http://forums.2cpu.com/showthread.php?t=84882
Partial list of MB compatibility.
http://www.overclock.net/hard-drives-storage/359025-perc-5-i-raid-card-tips.html
HUGE thread Re: the Perc5i, TONS of info, spread out over a few hundred pages.
Drivers
http://support.dell.com/support/dow...&servicetag=&os=WNET&osl=en&catid=-1&impid=-1
Add to this thread IF you have one of these please. I would like to get a concise version of the Overclockers thread.
www.wiredzone.com
http://www.atacom.com/program/print_html_new.cgi?Pagecode=SEARCH_ALL&Item_code=CABR_SUPE_10_11
http://www.cross-mark.com/50cm-serial-attached-scsisas-sff8484-sata-cable-p-842.html
Both have the cables for a VERY nice price (2-3 of them for the price of one at Microcenter). The cables I linked are the straight connector cables which MOST people with a hotswap or backplane will need.
You can get the angle connectors (I have 2 that will likely sit for a good while).
The battery so far I have seen on Ebay for the best price (figure on average to the US it will be about 30-40 for the cable and battery.)
The memory is tricky it seems, anyone with a Perc 5i PLEASE list your modules specs (i.e. DDR2 400 single bank ECC REG and model no: MT9HTF6472Y-40EB2)
I would like to try to get a concentrated thread of parts and model #s that work for this card (cables and memory especially).400MHz ECC-registered DIMMs with x16 DRAM components. Installing unsupported memory causes the system to hang at POST. You have to buy x8 or x16 Memory Modules:
x8 = 9 Chips (1 ECC)
x16 = 5 Chips (1 ECC)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134287
Verified memory that works for the Perc5i
Links to threads that contain the info but are EXTREMELY spread out.
http://forums.2cpu.com/showthread.php?t=84882
Partial list of MB compatibility.
http://www.overclock.net/hard-drives-storage/359025-perc-5-i-raid-card-tips.html
HUGE thread Re: the Perc5i, TONS of info, spread out over a few hundred pages.
Drivers
http://support.dell.com/support/dow...&servicetag=&os=WNET&osl=en&catid=-1&impid=-1
Add to this thread IF you have one of these please. I would like to get a concise version of the Overclockers thread.