Notices

Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

You think this is enough air flow?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 09-23-09, 05:00 PM Thread Starter   #1
Daddyjaxx
Member

 
Daddyjaxx's Avatar 

Join Date: Jan 2005
Location: Ormond Beach, FL.

 
You think this is enough air flow?


I will have these in my HAF. The only fan I am not replacing is the front 230mm, The TRUE shouldn't have issues with the Delta's held on with cable ties I hope? I also plan on doing the washer mod. I'd love to lap both the HSF and CPU, but I'm too chicken.

[IMG][/IMG]

Does anyone know of an aftermarket cooler for a version 2 285GTX? The Accelero looks like it may only work with the first revision.

__________________
I7-4930K, currently at 4.8 GHz
Rampage IV BE with EK m/b block
4 x 780TI Classifieds with EK full cover blocks
32GB Corsair Platinum 2666
Lil Devil V10 reverse SS case
2 x XSPC RX480 v3 and 1 x XSPC EX120 low profile
Mailstrom Extreme res w/ 2 x MCP35X
EK dual top with 2 x MCP35X
Primochill LRT Black 7/8" with EK compression
1TB Samsung 840, 512GB Samsung 840, W/D 4GB
Win 7 Pro
Daddyjaxx is offline   QUOTE Thanks
Old 09-23-09, 05:33 PM   #2
CualvezAsteria
Member

 
CualvezAsteria's Avatar 

Join Date: Aug 2009

 
Hm I've never heard of Coolink. Their specs look like outright lies. There's no way they output 94.2CFM with only 1200RPM LOL. I'd rather go for a Sanyo Denki H101. It is 38mm deep though if that's a problem. Or for a cheaper option, Yate Loon Medium.

Also, Kaze Maru's aren't that well respected, but they are considered decent. They'll get the job done... and I don't know of very many high speed 140mm fans.

Otherwise, you'll have a lot of airflow... I can't comment on placement or obstruction or whatnot but I do know the HAF is a sick case.

__________________
CPU: [Phenom II 940BE Lapped IHS] 216x17 3672 at 1.504v, 2592 NB at 1.425v
HSF: [True Black Rev C] Sanyo Denki San Ace H101 in push with cold outside air direct duct, Zalman ZM-F3 in pull
RAM: [4GB 2x2GB G.Skill F2-8500CL5D] 2.1v 5-5-5-15-24-2T DDR2-800
MB: [Gigabyte MA-790GP-UD4H]
GPU: [Gigabyte 9800GT Silent Cell] Stock Passive Cooling
HD: [Intel X25-M G2 80GB]
CASE: [Rosewill R5604-TBK]
FANS: [1 Zalman ZM-F3 undervolted] Exhaust
PSU: [Seasonic X750]
CualvezAsteria is offline   QUOTE Thanks
Old 09-23-09, 07:24 PM Thread Starter   #3
Daddyjaxx
Member

 
Daddyjaxx's Avatar 

Join Date: Jan 2005
Location: Ormond Beach, FL.

 
Thanks for pointing that out. I checked their website and the 94 is the metric equivelant of cfm. I've requested an RMA for the fans and asked that they bear the return shipping since their item description is incorrect.

You are right that there aren't many high speed 140mm fans, That's why I chose that. What ticks me off is that I was going to get the gentle typhoons instead of the Coolink fans but these were listed as 94 cfm and were two bucks cheaper.

__________________
I7-4930K, currently at 4.8 GHz
Rampage IV BE with EK m/b block
4 x 780TI Classifieds with EK full cover blocks
32GB Corsair Platinum 2666
Lil Devil V10 reverse SS case
2 x XSPC RX480 v3 and 1 x XSPC EX120 low profile
Mailstrom Extreme res w/ 2 x MCP35X
EK dual top with 2 x MCP35X
Primochill LRT Black 7/8" with EK compression
1TB Samsung 840, 512GB Samsung 840, W/D 4GB
Win 7 Pro
Daddyjaxx is offline   QUOTE Thanks
Old 09-23-09, 09:15 PM   #4
CualvezAsteria
Member

 
CualvezAsteria's Avatar 

Join Date: Aug 2009

 
Gentle Typhoons are a great choice but so are Yate Loons for 1/3 the price. There's a reason Yates are so widely loved on overclocker forums, genuine Yates (only at Petra's) that is. Gentle Typhoons will probably be quieter by a small margin but they also carry a different noise signature. Here are some youtube links:

Typhoon AP-15

Yate Loon High Speed

The medium is closer to the AP-15 in terms of RPM so it's not quite a fair comparison.

__________________
CPU: [Phenom II 940BE Lapped IHS] 216x17 3672 at 1.504v, 2592 NB at 1.425v
HSF: [True Black Rev C] Sanyo Denki San Ace H101 in push with cold outside air direct duct, Zalman ZM-F3 in pull
RAM: [4GB 2x2GB G.Skill F2-8500CL5D] 2.1v 5-5-5-15-24-2T DDR2-800
MB: [Gigabyte MA-790GP-UD4H]
GPU: [Gigabyte 9800GT Silent Cell] Stock Passive Cooling
HD: [Intel X25-M G2 80GB]
CASE: [Rosewill R5604-TBK]
FANS: [1 Zalman ZM-F3 undervolted] Exhaust
PSU: [Seasonic X750]
CualvezAsteria is offline   QUOTE Thanks
Old 09-23-09, 09:24 PM   #5
Evilsizer
Senior Fourm Spammer


 
Evilsizer's Avatar 

Join Date: Jun 2002
Location: Austin,Texas

10 Year Badge
 
nope not enough.

__________________

Intel G3258@4.2ghz | Asrock Z97M OC Formula | Galaxy GTX660 GC | PM840 Pro 128GB, PM830 FDE 250GB | SilverStone ST45SF
i3 370M | Jetway NF98 | 2x2gig DDR3-1066 | pico 120WI | Asus GT630 2GB (GK208) |
intel i5 2450M


"I Love To Camp!"
"Commensing Shock Therapy!"
I'm jonnyGURU of jonnyGURU.com and we don't overload PSU's - JonnyGURU

HeatWare
Evilsizer is offline Heatware Profile   QUOTE Thanks
Old 09-24-09, 07:52 AM   #6
Steven-1979
Member



Join Date: Nov 2008

 
Quote:
Originally Posted by Evilsizer View Post
nope not enough.
haha thats awesome! How would you get that to work with a standard wall outlet?

__________________
- How to pad-mod/VID-mod your cpu

Currently waiting for lga2011 to upgrade to new system

CPU: Intel E8500
Motherboard: GIGABYTE GA-EP45-UD3P
RAM: 4gb Corsair Dominator DDR2 1066 w/ RAM cooling fan
Cooling: CPU/GPU/NB = Water Cooled
Graphics: EVGA GeForce GTX 260 core 216 (@ 771/1566/1298)
PSU: Corsair tx 650w
Steven-1979 is offline   QUOTE Thanks
Old 09-24-09, 04:43 PM Thread Starter   #7
Daddyjaxx
Member

 
Daddyjaxx's Avatar 

Join Date: Jan 2005
Location: Ormond Beach, FL.

 
I'd get that, but it would probably blow the computer over.

__________________
I7-4930K, currently at 4.8 GHz
Rampage IV BE with EK m/b block
4 x 780TI Classifieds with EK full cover blocks
32GB Corsair Platinum 2666
Lil Devil V10 reverse SS case
2 x XSPC RX480 v3 and 1 x XSPC EX120 low profile
Mailstrom Extreme res w/ 2 x MCP35X
EK dual top with 2 x MCP35X
Primochill LRT Black 7/8" with EK compression
1TB Samsung 840, 512GB Samsung 840, W/D 4GB
Win 7 Pro
Daddyjaxx is offline   QUOTE Thanks
Old 09-24-09, 05:36 PM   #8
only.one.ryder
Registered



Join Date: Jul 2009

 
I run with 8 Yate Loon high speeds cpu and grfx always around 30-35 idel 40-45 load

__________________
CPU: E6750@3.8 with ARCTIC COOLING Freezer 7 Pro heatsink
MOBO: P5N-E SLI
MEM: Crucial Ballistix 800 2GB (2 x 1GB) with OCZ XTC Blue LED Memory Cooler (not hookup ATM due to air flow with the CM-690)
GRX: GTX 260 Core 216 896MB OC'ed 805/1714/1300 temps 37 idle 56 load 8% fan speed
SCREEN: ASUS VH226H Black 21.5" 2ms
CASE: COOLER MASTER 690 with 8 Yate Loon High Speed 120mm Fan (40dBa, 88CFM)
PSU: CORSAIR CMPSU-750TX 750W
#1 best newegg review....
"running a I7 965 @infinite GHZ, 4000GB of ddr3 @ 8588498594mhz, 48 WD raptor HD's, 99-way sli with gtx295's, all running on a sunbeamtech 580W psu"
only.one.ryder is offline   QUOTE Thanks
Old 09-24-09, 07:59 PM Thread Starter   #9
Daddyjaxx
Member

 
Daddyjaxx's Avatar 

Join Date: Jan 2005
Location: Ormond Beach, FL.

 
You don't have an I7. You can't get 40-45 load temps on any I7 with anything less than extreme cooling.

__________________
I7-4930K, currently at 4.8 GHz
Rampage IV BE with EK m/b block
4 x 780TI Classifieds with EK full cover blocks
32GB Corsair Platinum 2666
Lil Devil V10 reverse SS case
2 x XSPC RX480 v3 and 1 x XSPC EX120 low profile
Mailstrom Extreme res w/ 2 x MCP35X
EK dual top with 2 x MCP35X
Primochill LRT Black 7/8" with EK compression
1TB Samsung 840, 512GB Samsung 840, W/D 4GB
Win 7 Pro
Daddyjaxx is offline   QUOTE Thanks
Old 09-25-09, 01:31 AM   #10
Evilsizer
Senior Fourm Spammer


 
Evilsizer's Avatar 

Join Date: Jun 2002
Location: Austin,Texas

10 Year Badge
 
@steven
you wouldnt, it is a 12v raditor fan for a car/truck. could use a psu possible but i think the current draw is way to high for a computer psu. would need standalone 12/13.8v power supply.

Quote:
Originally Posted by Daddyjaxx View Post
You don't have an I7. You can't get 40-45 load temps on any I7 with anything less than extreme cooling.
never say never, unclocked/undervolted would... you ever said it had to be overclocked.

__________________

Intel G3258@4.2ghz | Asrock Z97M OC Formula | Galaxy GTX660 GC | PM840 Pro 128GB, PM830 FDE 250GB | SilverStone ST45SF
i3 370M | Jetway NF98 | 2x2gig DDR3-1066 | pico 120WI | Asus GT630 2GB (GK208) |
intel i5 2450M


"I Love To Camp!"
"Commensing Shock Therapy!"
I'm jonnyGURU of jonnyGURU.com and we don't overload PSU's - JonnyGURU

HeatWare
Evilsizer is offline Heatware Profile   QUOTE Thanks
Old 09-25-09, 04:42 AM   #11
deadlysyn
Folding Team Content Editor
Who Dolk'd my stars Senior Member

 
deadlysyn's Avatar 

Join Date: Mar 2005
Location: Stealing your megahurtz at night

 
Quote:
Originally Posted by CualvezAsteria View Post
Gentle Typhoons are a great choice but so are Yate Loons for 1/3 the price. There's a reason Yates are so widely loved on overclocker forums, genuine Yates (only at Petra's) that is.
Actually, I have picked up some Yates from SVC, and they are genuine. Atleast the best I can tell they are (closed corners, larger motor hub). I may not be able to guarantee that they are genuine, but they do seem to be living up to the specs, and if one dies, I'm only out $6 plus shipping. Actually, I got the high speed, and both of them seem half as loud combined as my 120x38 ultra high speed Panaflo.
deadlysyn is offline Author Profile   QUOTE Thanks
Old 09-25-09, 06:56 PM Thread Starter   #12
Daddyjaxx
Member

 
Daddyjaxx's Avatar 

Join Date: Jan 2005
Location: Ormond Beach, FL.

 
Performance PC's finally updated the specs for the fans that they said were 94 cfm. Now if they would respond to my request for the RMA since they were listed incorrectly, I would be a camper.

I would bet you couldn't get 40-45 load temps on an underclocked I7 either. Maybe...if you turned of hyperthreading and 2 of the physical cores.

__________________
I7-4930K, currently at 4.8 GHz
Rampage IV BE with EK m/b block
4 x 780TI Classifieds with EK full cover blocks
32GB Corsair Platinum 2666
Lil Devil V10 reverse SS case
2 x XSPC RX480 v3 and 1 x XSPC EX120 low profile
Mailstrom Extreme res w/ 2 x MCP35X
EK dual top with 2 x MCP35X
Primochill LRT Black 7/8" with EK compression
1TB Samsung 840, 512GB Samsung 840, W/D 4GB
Win 7 Pro

Last edited by Daddyjaxx; 09-25-09 at 07:01 PM.
Daddyjaxx is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 03:26 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?