walmart black friday emachines e627 touchpad help

jabroni1m · 12-01-09, 09:40 PM

So i'm sure alot of people bought the Emachines for $200 on black friday from walmart like I did for my G/F. Problem is I cannot find out how to disable the touchpad. I have tried FN F7 and tried going into the mouse options but cannot figure it out.

Zerius · 12-02-09, 11:35 AM

Do the touchpad drivers allow for the disablement when an external usb device is attached? Try that and see if it works

ratbuddy · 12-02-09, 11:47 AM

There's also sometimes a BIOS option to do the same thiing Zerius mentioned too.

MassiveOverkill · 12-02-09, 05:53 PM

Is it listed in Device Manager? If so try disabling it from there.

Rezik4 · 12-05-09, 06:56 PM

On the emachines E627 laptop, there is a touchpad disable button to the left of the power button in the center of the machine. The picture label shows a hand pointing at a rectangle. Once disabled, you will see a tiny orange light turn on behind the button, and an onscreen image will also popup and then fade away after 1-2 seconds.

jabroni1m · 12-07-09, 07:28 PM

LoL Thanks Rezik4, I can't believe I didn't see that button.

12-01-09, 09:40 PM	Thread Starter #1
jabroni1m Member Join Date: May 2002	walmart black friday emachines e627 touchpad help So i'm sure alot of people bought the Emachines for $200 on black friday from walmart like I did for my G/F. Problem is I cannot find out how to disable the touchpad. I have tried FN F7 and tried going into the mouse options but cannot figure it out. __________________ My Heatware, 22-0-0 I seem to put a lot of wrong things in this darn sig
	QUOTE Thanks

12-02-09, 11:35 AM	#2
Zerius Registered Join Date: Dec 2005	Do the touchpad drivers allow for the disablement when an external usb device is attached? Try that and see if it works
	QUOTE Thanks

12-02-09, 11:47 AM	#3
ratbuddy Member Join Date: Aug 2007 Location: Hartford, CT	There's also sometimes a BIOS option to do the same thiing Zerius mentioned too. __________________ HTPC - 2500k - 212+ - GA-Z68MX-UD2H-B3 - 2x4GB G.Skill DDR3-1600 - Vertex 2 90GB, Spinpoint F3 1TB w/M4 64GB ISRT Cache - Gigabyte GTX 460 1GB SLI - Silverstone LC10B-E - Corsair TX750W ----- Main - X3 450 - ASRock A790GMH/128M 790GX - 2x2GB G.Skill 4-4-4-12 - 2xWD Green 1TB - Silverstone TJ08 - Corsair CX400W Nothin' up my sleeve..
	QUOTE Thanks

12-02-09, 05:53 PM	#4
MassiveOverkill Member Join Date: Dec 2002 Location: Florida	Is it listed in Device Manager? If so try disabling it from there. __________________ MSI 890GXM-G65 LAN Gear MOM Phenom II 1055T 3.8 Ghz 1.4V Batch 1015DPAW Corsair H50 w/120x38 Asus 5850CU 1000/1125 4x2048 OCZ DDR3 1600 Obsidian Western Digital WD1002FAEX GSkill Titan 128 gig SSD Silverstone SST 75F-P 3DMark06 21837
	QUOTE Thanks

12-05-09, 06:56 PM	#5
Rezik4 New Member Join Date: Dec 2009	On the emachines E627 laptop, there is a touchpad disable button to the left of the power button in the center of the machine. The picture label shows a hand pointing at a rectangle. Once disabled, you will see a tiny orange light turn on behind the button, and an onscreen image will also popup and then fade away after 1-2 seconds.
	QUOTE Thanks

walmart black friday emachines e627 touchpad help

Internet Services

Website Development

Tech Hardware

12-07-09, 07:28 PM	Thread Starter #6
jabroni1m Member Join Date: May 2002	LoL Thanks Rezik4, I can't believe I didn't see that button. __________________ My Heatware, 22-0-0 I seem to put a lot of wrong things in this darn sig
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search