straight to point, here is my system
intel core i3 530
megahalem rev.b w/ cm 2000rpm led fan push/pull
gigabyte ga-p55a-ud4p
team xtreme PC3 16000 DDR3 LV 2000 MHz CL9 (2*2GB)
XFX Radeon HD5770
so far I have OC the processor up to 4Ghz, with all setting in auto except blck (set it to 182). With that result I can enter windows normally, with temp approximately 25C, but haven't tried with p95 or OCCT. For notes, auto made the setting to CPU Vid 1,36v, QPI Link 2913, Dram freq 910 (1820), fb:ram 4:20, 11-9-9-24-1t
Can someone help me in OC it manually because beside I'm noob in i3 530 I also noob in intel socket 1156, I was an AMD users. I wish I could reach at least 4,5Ghz with air as I saw many people did it.
Here is the BIOS template
Advanced Frequency Settings:
CPU Clock Ratio 21x
Advanced Core Features [Press Enter]:
Intel(R) Turbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Disabled]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[x]
Uncore Clock Ratio....................[18x]
Uncore Frequency.........................3600MHz
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[200]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Disabled]
Memory Frequency (MHz)................2000
PCI Express Frequency (MHz)..............[Auto]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................2000
Performance Enhance (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................
Profile QPI Voltage ..................
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[8]
tRCD....................................[8]
tRP.....................................[9]
tRAS...................................[24]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [1]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Level 2]
CPU Vcore..................1.19375v..[1.xv]
QPI/VTT Voltage..........1.100v.....[1.x00v]
>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled]
for all the help I appreciate and thanks for it.
intel core i3 530
megahalem rev.b w/ cm 2000rpm led fan push/pull
gigabyte ga-p55a-ud4p
team xtreme PC3 16000 DDR3 LV 2000 MHz CL9 (2*2GB)
XFX Radeon HD5770
so far I have OC the processor up to 4Ghz, with all setting in auto except blck (set it to 182). With that result I can enter windows normally, with temp approximately 25C, but haven't tried with p95 or OCCT. For notes, auto made the setting to CPU Vid 1,36v, QPI Link 2913, Dram freq 910 (1820), fb:ram 4:20, 11-9-9-24-1t
Can someone help me in OC it manually because beside I'm noob in i3 530 I also noob in intel socket 1156, I was an AMD users. I wish I could reach at least 4,5Ghz with air as I saw many people did it.
Here is the BIOS template
Advanced Frequency Settings:
CPU Clock Ratio 21x
Advanced Core Features [Press Enter]:
Intel(R) Turbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Disabled]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[x]
Uncore Clock Ratio....................[18x]
Uncore Frequency.........................3600MHz
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[200]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Disabled]
Memory Frequency (MHz)................2000
PCI Express Frequency (MHz)..............[Auto]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................2000
Performance Enhance (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................
Profile QPI Voltage ..................
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[8]
tRCD....................................[8]
tRP.....................................[9]
tRAS...................................[24]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [1]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Level 2]
CPU Vcore..................1.19375v..[1.xv]
QPI/VTT Voltage..........1.100v.....[1.x00v]
>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled]
for all the help I appreciate and thanks for it.
