- Joined
- Mar 19, 2009
- Location
- Anderson, South Carolina
I changed 920 & 965 around so that the 920 is in the classy(better oc)
and the stock cooler for cpu will only work upto 2.8 on the 965 AND NO MORE lol I tried
anywho heres what I got for an oc on the classy:
and the link: http://img196.imageshack.us/img196/6104/6hrsprime.jpg
so after testing was complete I readjusted the memory
Hopefully she sticks:
and the link:http://img196.imageshack.us/img196/7493/hopeitsticks.jpg
Temps look good OCZ freeZe rocks
Here is my Template:
some bad news..I blew a rear 285, now worky no more..RMA
anywho im back in the thick again today lol
FOLD ON
and the stock cooler for cpu will only work upto 2.8 on the 965 AND NO MORE lol I tried
anywho heres what I got for an oc on the classy:
and the link: http://img196.imageshack.us/img196/6104/6hrsprime.jpg
so after testing was complete I readjusted the memory
Hopefully she sticks:
and the link:http://img196.imageshack.us/img196/7493/hopeitsticks.jpg
Temps look good OCZ freeZe rocks
Here is my Template:
Code:
Mother Board ( EVGA X58 Classified E-759 )
Drivers ( ? )
Bios ( X58S21H)
CPU ( 920 DO )
CPU Cooler ( Alphacool HF1 yellowstone)
Memory ( Gskill Trident 2000 9 9 9 24 74 2x3 gb)
PSU ( Kingwin1000W & VissionTech 450 bay psu)
GPU ( GTX285 X 3 )
Drivers ( 185.85 )
Operating System ( Windows Vista 64 Ultimate )
Frequency Control
CPU Clock Ratio (21)
CPU Host Frequency (Mhz) ( 206 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 4000Mhz { ?X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1600Mhz / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 21 )
tRFC Setting ( 60 )
Command Rate ( 2t )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.40625 )
CPU VTT Voltage ( +250 )
CPU PLL VCore ( 1.250 )
**IOH PLL VCore ( 1.8 )
DIMM Voltage ( 1.60)
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.250 )
IOH VCore ( 1.275 )
IOH/ICH I/O Voltage ( Auto )
BR04 ( NF200) Voltage ( Auto)
VTT PWM Frequency ( 250 KHZ )
CPU PWM Frequency ( 800 KHZ )
CPU Impedance ( Auto )
QPI Signal Compensation ( Auto )
ICH VCore ( 1.2 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Enabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
OC Recovery ( Disabled )
Turbo Performance ( Enabled )
anywho im back in the thick again today lol
FOLD ON