[u]MB Intelligent Tweaker(M.I.T.)[/u]
Robust Graphics Booster ...............: turbo
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio.....................:. N/A
CPU Frequency ...........................: 4,000Mhz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............:500Mhz
PCI Express Frequency (Mhz) .........:103Mhz
C.I.A. 2......................................: Disabled
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 700mv
PCI Express Clock Drive.................: 900mv
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps
DRAM Performance Control
Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: [Disabled]
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 2.00B
Memory Frequency (Mhz) ..............: 1,000Mhz
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time..........................: 5
tRCD ...........................................: 5
tRP..............................................: 5
tRAS............................................: 15
Advanced Timing Control [Press Enter]
tRRD...........................................:4
tWTR..........................................:4
tWR............................................:8
tRFC...........................................:49
tRTP...........................................:4
Command Rate (CMD) ....................:2T
Channel A
Channel A Timings Settings [Press Enter]
Static tRead Value.........................:10
tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment..................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)...................:8
Twr2wr(Different Rank)..................:8
Twr2rd(Different Rank)..................:7
Trd2wr(Same/Diff Rank).................:9
Dimm1 Clock Skew Control.............:Auto ps
Dimm2 Clock Skew Control.............:Auto ps
DDR Write Training .....................: Enabled
Channel A Driving Settings [Press Enter]
Driving Strength Profile...................:[1066]
Data Driving Pull-Up Level...............:Auto
Cmd Driving Pull-Up Level................:Auto
Ctrl Driving Pull-Up Level.................:Auto
Clk Driving Pull-Up Level..................:Auto
Data Driving Pull-Down Level...........:Auto
Cmd Driving Pull-Down Level............:Auto
Ctrl Driving Pull-Down Level.............:Auto
Clk Driving Pull-Down Level..............:Auto
Channel B
Channel B Timings Settings [Press Enter]
Static tRead Value.........................: 8
tRD Phase0 Adjustmen....................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment ..................:Auto
tRD Phase3 Adjustment...................:Auto
Trd2rd(Different Rank).....................:8
Twr2wr(Different Rank).....................:8
Twr2rd(Different Rank).....................:7
Trd2wr(Same/Diff Rank)....................:9
Dimm1 Clock Skew Control...................:Auto ps
Dimm2 Clock Skew Control...................:Auto ps
DDR Write Training .........................: Enabled
Channel B Driving Settings [Press Enter]
Driving Strength Profile...................:[1066]
Data Driving Pull-Up Level.................:Auto
Cmd Driving Pull-Up Level..................:Auto
Ctrl Driving Pull-Up Level.................:Auto
Clk Driving Pull-Up Level..................:Auto
Data Driving Pull-Down Level...............:Auto
Cmd Driving Pull-Down Level................:Auto
Ctrl Driving Pull-Down Level...............:Auto
Clk Driving Pull-Down Level................:Auto
[U]Motherboard Voltage Control[/U]
Voltage Type.………... Normal
CPU
Load Line Calibration......................: [Enabled]
CPU Vcore...................................:1.39375v
CPU Termination…..... 1.200V*........:1.320v
CPU PLL...............1.500V*.............:1.57 v
CPU Reference.........0.755V*..........:0.836 v
MCH/ICH
MCH Core..............1.100V................: 1.34v
MCH Reference.........0.800V..............: 0.776v
MCH/DRAM Ref..........0.900V...............:Normal
ICH I/O.................1.50V...............: Auto
ICH Core............……1.100V...............:Auto
DRAM
DRAM Voltage..........1.800V...............: 2.100v
DRAM Termination......0.900V...............: Normal
Channel A Reference...0.900V...............: Normal
Channel B Reference...0.900V...............: Normal
[U]Advanced Settings[/U]
Limit CPUID Max. to 3......................: [Disabled]
No-Execute Memory Protect..................: [Disabled]
CPU Enhanced Halt (C1E)....................: [Disabled]
C2/C2E State Support.......................: [Disabled]
x C4/C4E State Support.....................: [Disabled]
CPU Thermal Monitor 2(TM2) ................: [Enabled]
CPU EIST Function..........................: [Disabled]
Virtualization Technology..................: [Disabled]
