Looking for some modding ideas

I'm currently using this case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811215009

I'd like to try my hand at some case modding. I've never done anything like this before and I'm looking for some ideas. Obviously a window probably can't be done on this case because of the side fans, but throw some ideas at me. If this was your case, what would you do with it?

You could probably still plexi that.. the fan mount on the door is attached to the door itself.. so theres already a big hole there if you remove that shroud (looks like 4 corners bolted or snapped through) just dremel out a bigger cutout above that as well and cut some air spacers in the plexi for the fans to get reattached to..

or you could just add a smaller window above the fans, HAF-style.

Spartacus288 said:

or you could just add a smaller window above the fans, HAF-style.

Click to expand...

I think I like that idea, maybe with either blue or black plexi. Because its up at the top of the case all it would really show is the PSU though.

I'm also considering adding a 120mm fan at the front of the case below the door, maybe with a black anodized grill like this one:
http://www.mnpctech.com/120mm_Aluminum_Computer_Fan_Grills.html

I'm also considering painting the inside black, that's one thing I really like about my other system which I have inside a CM Storm Scout.

Thanks and keep the ideas coming.

OK, I'm not sure if I'm going to put the 120mm fan in the front of the case but here's what I've decided on so far.

I'm going to put a window on the left side above the 2x250mm fans, most likely black/smoked acrylic. I'm going to use a 3x120mm template for the window:
http://www.mnpctech.com/Laser_Radiator_Grill_Templates.html

On the right side panel I will install 3x120mm exhaust fans w/blue led's. I'll probably go with 3 of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811998121

What do you guys think?

Edit:
Just ordered everything. Had to go with 92mm fans for the right side otherwise I'd have to do some cutting.

Parts List:
2x92mm blue led fan - right side exhaust
1x120mm blue led fan - rear exhaust
Smoked black acrylic panel
U-channel
Double sided tape

I'll start up a new project thread once everything arrives.