- Joined
- Oct 27, 2005
- Location
- Lake Village, IN 46349
I can't seem to nail down the settings to get my setup stable. My CPU is fine at 471FSB, but the board/Memory Controller won't get totally stable.
I can't seem to find any fool proof info on what kind of voltage would be safe for MCH and VTT (If that affects my issues).
Here's how I currently have things set:
My CPU does 4ghz at 1.3875v, but that was always with LLC enabled. in trying to nail down this problem, I thought maybe vdroop was causing problems, so I upped my vcore to 1.4v
I would appreciate any input from anyone with experience with this board/chip/setup.
Thanks!
I can't seem to find any fool proof info on what kind of voltage would be safe for MCH and VTT (If that affects my issues).
Here's how I currently have things set:
My CPU does 4ghz at 1.3875v, but that was always with LLC enabled. in trying to nail down this problem, I thought maybe vdroop was causing problems, so I upped my vcore to 1.4v
I would appreciate any input from anyone with experience with this board/chip/setup.
Thanks!