Notices

Overclockers Forums > Hardware > Memory
Memory
Forum Jump

DDR-3 Help

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 07-24-10, 06:04 PM Thread Starter   #1
johnm
Member



Join Date: Nov 2002
Location: To close to nyc

10 Year Badge
 
DDR-3 Help


Need some ddr3 advice for a ASRock58 I try to shoot for 3.8 water
I remember there was problem on high volt ram and i7x58.
On C2d had good luck with GSkill
Below are 3x2 GSkill

http://www.newegg.com/Product/Produc...82E16820231225
1.5-1.6v cas 9

http://www.newegg.com/Product/Produc...82E16820231247
1.6V -1.65V cas 8

http://www.newegg.com/Product/Produc...82E16820231335
1.5V cas 7 (is this worth 20 buck more) dont state Compatible for i7

__________________
ASRock X58 Extreme,930@4080, Apogee xt D-4,6GBGskill cas7,ssd,Sapphire5870s in cf.
ASRockZ68,ssd boot,2500K,16GBGskill,4890,Apogee xt-r2 Back up pc.
johnm is offline   QUOTE Thanks
Old 07-24-10, 07:09 PM   #2
Weeman

 
Weeman's Avatar 

Join Date: Nov 2009

 
with out knowing more details I'd go with F3-12800CL7T-6GBPI, slightly lower latency. not that it would be drastically better. with a little looking around it gets quite good reviews.

__________________

CPU: Intel I7 960 Ultra120 cooler
Mobo: ASUS P6X58-E-WS
HD: OCZ Vertex 2 120GB
RAM: Corsair DDR3 8-8-8-20 12GB
GPU: 2x ATI HD5970 CrossfireX
PSU: Corsair AX1200
Case: Silverstone TJ07
Weeman is offline   QUOTE Thanks
Old 07-24-10, 08:16 PM Thread Starter   #3
johnm
Member



Join Date: Nov 2002
Location: To close to nyc

10 Year Badge
 
F3-12800CL7T-6GBPI was going to order due to lowest volts and fast timming.
But couldnt pass up a asrock58 for 66 and a 930 for 199.

Are heat sink MB spacing the same on Socket 1156 and 1366.

__________________
ASRock X58 Extreme,930@4080, Apogee xt D-4,6GBGskill cas7,ssd,Sapphire5870s in cf.
ASRockZ68,ssd boot,2500K,16GBGskill,4890,Apogee xt-r2 Back up pc.
johnm is offline   QUOTE Thanks
Old 07-24-10, 09:18 PM   #4
jaymz9350
Member

 
jaymz9350's Avatar 

Join Date: May 2006
Location: Marytucky, Ohio

 
Quote:
Originally Posted by johnm View Post
Are heat sink MB spacing the same on Socket 1156 and 1366.
No, 1366 has a slightly larger spacing.

__________________
i7 3770k @ 4.5 1.25v
4x2 GB G.Skill Ripjaw DDR3 1600 9-9-9-24
ASRock Fatality Pro Z77
XFX 7970 / Samsung SyncMaster 216BW
Corsair TX750
128 GB Samsung 830 / 1.5 TB WD Green / 500 GB WD Blue
Folding User Stats
jaymz9350 is offline Benching Profile Folding Profile Heatware Profile   QUOTE Thanks
Old 07-25-10, 12:27 AM   #5
ChanceCoats123
d20 in a jacket


 
ChanceCoats123's Avatar 

Join Date: Feb 2009
Location: Illinois

 
Quote:
Originally Posted by johnm View Post
Need some ddr3 advice for a ASRock58 I try to shoot for 3.8 water
I remember there was problem on high volt ram and i7x58.
On C2d had good luck with GSkill
Below are 3x2 GSkill

http://www.newegg.com/Product/Produc...82E16820231225
1.5-1.6v cas 9

http://www.newegg.com/Product/Produc...82E16820231247
1.6V -1.65V cas 8

http://www.newegg.com/Product/Produc...82E16820231335
1.5V cas 7 (is this worth 20 buck more) dont state Compatible for i7
The tightest timed, highest speed Ram that runs the lowest voltage possible at those tight timings and high speeds is the winner every time. Don't skimp on ram. It makes a noticeable difference.

Another thing, I just want to LOL at the "dont state Compatible for i7." What other processors can run triple channel memory? Or maybe it's for Amd and they just threw a third stick in there for fun. I'm just messing with you.

__________________
Ed - "Aight it's pulling down... Thing is really tuned for LN2 though."
This is the team you are looking for...
I accept Bitcoins!
ChanceCoats123 is offline Benching Profile Heatware Profile   QUOTE Thanks
Old 07-25-10, 02:19 AM   #6
Weeman

 
Weeman's Avatar 

Join Date: Nov 2009

 
ummm... my guess is the I5...

__________________

CPU: Intel I7 960 Ultra120 cooler
Mobo: ASUS P6X58-E-WS
HD: OCZ Vertex 2 120GB
RAM: Corsair DDR3 8-8-8-20 12GB
GPU: 2x ATI HD5970 CrossfireX
PSU: Corsair AX1200
Case: Silverstone TJ07
Weeman is offline   QUOTE Thanks
Old 07-25-10, 06:30 AM Thread Starter   #7
johnm
Member



Join Date: Nov 2002
Location: To close to nyc

10 Year Badge
 
Made it through the ddr2 years Gskil+ballistic.
Still have a i45 @1066 and i48@1110 with 2x2Gskil+2x1Blastic.
Lost my job 1year ago so I didnt follow the i7s
Mirco ctr had to put a store close by 930s 199.
A week ago amazon had a ASRock 58 for 66.
ASRock has to be the cheapest MB I ever got.
Never had a quad so should be fun.
Now we order some 1.5V cas 7 Gskill.
Thanks all

__________________
ASRock X58 Extreme,930@4080, Apogee xt D-4,6GBGskill cas7,ssd,Sapphire5870s in cf.
ASRockZ68,ssd boot,2500K,16GBGskill,4890,Apogee xt-r2 Back up pc.
johnm is offline   QUOTE Thanks
Old 07-25-10, 12:24 PM   #8
ChanceCoats123
d20 in a jacket


 
ChanceCoats123's Avatar 

Join Date: Feb 2009
Location: Illinois

 
Quote:
Originally Posted by ggledhil View Post
ummm... my guess is the I5...
Socket LGA 1156 is dual channel. Don't throw incorrect information around because it confuses those who don't know better.

Quote:
Originally Posted by johnm View Post
Made it through the ddr2 years Gskil+ballistic.
Still have a i45 @1066 and i48@1110 with 2x2Gskil+2x1Blastic.
Lost my job 1year ago so I didnt follow the i7s
Mirco ctr had to put a store close by 930s 199.
A week ago amazon had a ASRock 58 for 66.
ASRock has to be the cheapest MB I ever got.
Never had a quad so should be fun.
Now we order some 1.5V cas 7 Gskill.
Thanks all
Nice. Good luck with the i7 build! I wish there was a MC around me. I would definitely give an 920 rig some thought.

__________________
Ed - "Aight it's pulling down... Thing is really tuned for LN2 though."
This is the team you are looking for...
I accept Bitcoins!
ChanceCoats123 is offline Benching Profile Heatware Profile   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Memory
Memory
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 04:10 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?