Notices

Overclockers Forums > Hardware > Cases and Case Modding
Cases and Case Modding
Forum Jump

Haf 932 + corsair h70 can it reach in the top far right 120mm fan slot?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 09-11-10, 04:48 PM Thread Starter   #1
Kyushu
Registered



Join Date: Aug 2010

 
Haf 932 + corsair h70 can it reach in the top far right 120mm fan slot?


Want to buy this case and CPU cooler but I need to know if the hoses can reach that top far right 120mm fan slot. Would like to mount it there so I can keep the 200mm top fan installed aswell.
Kyushu is offline   QUOTE Thanks
Old 09-17-10, 09:37 PM   #2
BigTerminator
Member

 
BigTerminator's Avatar 

Join Date: Jul 2010
Location: Maryland

 
It will fit if you are talking about the 120mm slot for exhausting. They are made to be compatible with most case so you shouldn't have a problem. I would suggest you getting a Noctua NH-D14 instead. I was thinking about the H70 but the Noctua performs better and is silent.

__________________
My Desktop:
Intel Core i7 875k @ 4.2ghz 1.4v | Noctua NH-D14 with 3 Rosewill RFX 120 Fans
MSI Big Bang Fuzion | 8gb G. Skill Sniper 1600mhz | GTX 760 Gigabyte Rev 2.0 1333/1850mhz
Cooler Master HAF X With Window | Corsair TX 750 watt PSU | 2x500gb Samsung F3 RAID 0
Asus Essence ST | 3D Mark 11 High Scores = Performance 9000

My Laptop: Lenovo Y580
Intel Core i7 3630qm @ 2.4ghz | 8gb DDR3 1600mhz | 120gb ADATA SSD | 1tb HDD
Nvidia GTX 660m @ 1260/1400mhz | 15.6" 1080p
Arctic MX-4 Thermal Paste | Rosewill Notebook Cooler | 3d Mark 11 High Scores = Performance 3400 Extreme 1100
BigTerminator is offline   QUOTE Thanks
Old 09-17-10, 10:08 PM   #3
CgS Drone
Member

 
CgS Drone's Avatar 

Join Date: Jul 2010
Location: SLC, UT.

 
Hold on if you are asking if you can install the radiator and the 200mm top fan both in the top then no. The 200mm top fan is positioned center of the mounts where the two 120mm fans would go, so you can either have the 200mm fan in the top or you can have two 120mm fans in the top.

__________________
C2D E8500, Gigabyte EP45-UD3P-------------955BE, TA890FXE, Cooler Master GX 750
Cooler Master 212+, Corsair 750TX----------HAF 932, Noctua D-14
HyperX T1 1066 5-5-5-15 (2x2GB)----------Geil Black Dragon (2x2GB)
MSI GTX 260, Raptor 75gb.------------------Gigabyte GTX 460, Seagate 500gb

>>>>>>>HeatWare<<<<<<<
CgS Drone is offline   QUOTE Thanks
Old 09-18-10, 12:55 PM   #4
Headstand
Member



Join Date: Jan 2010
Location: Western Germany(misplaced Texan)

 
Haven't forgot about you, my H70 just hasn't gotten here yet.

__________________
HAF 932 with lots of fans
GA-P55A-UD6
i7 860
GTX460 768MB
GT240N 1GB
H50 push-pull
2 x 2GB G.SKILL Trident DDR3 2000 (PC3 16000)
60GB OCZ Agility
1 x WD 500 AAKS
2 x WD Caviar Black 1TB SATAIII - RAID1
4 x WD Caviar Green 1.5TB
HEAT
Headstand is offline   QUOTE Thanks
Old 09-18-10, 05:55 PM   #5
ch0b1ts
Registered



Join Date: Feb 2010
Location: Washington DC

 
You can see where I mounted mine. As you can see from the length of the hoses, I do not think it would easily reach to the top, front most 120mm Fan Slot. The middle one, no problem.


__________________
Sakura Miku: FX8320@4.8Ghz, Sabertooth 990FX R2, 16GB Corsair Dominator Platinum 2133, 256GB Samsung 840Pro SSD, 1TB Seagate Hybrid,MSI Twin Frozer R9-270X, Corsair 540 Air, Corsair H100i, Corsair AX760, Win 8.1
Snow Miku: MacBook Pro (15",2.66Ghz i7,8GB,1TB Hybrid,240GB SSD,10.9.1)
Miku: Mac MiniServer (2.53Ghz C2D,8GB,2x500GB RAID0,10.9.1)

Last edited by ch0b1ts; 09-18-10 at 06:05 PM.
ch0b1ts is offline   QUOTE Thanks
Old 09-18-10, 06:00 PM   #6
ch0b1ts
Registered



Join Date: Feb 2010
Location: Washington DC

 
Quote:
Originally Posted by CgS Drone View Post
Hold on if you are asking if you can install the radiator and the 200mm top fan both in the top then no. The 200mm top fan is positioned center of the mounts where the two 120mm fans would go, so you can either have the 200mm fan in the top or you can have two 120mm fans in the top.
Actually, you can put 3x120mm Fans in the Top of the HAF 932.

__________________
Sakura Miku: FX8320@4.8Ghz, Sabertooth 990FX R2, 16GB Corsair Dominator Platinum 2133, 256GB Samsung 840Pro SSD, 1TB Seagate Hybrid,MSI Twin Frozer R9-270X, Corsair 540 Air, Corsair H100i, Corsair AX760, Win 8.1
Snow Miku: MacBook Pro (15",2.66Ghz i7,8GB,1TB Hybrid,240GB SSD,10.9.1)
Miku: Mac MiniServer (2.53Ghz C2D,8GB,2x500GB RAID0,10.9.1)
ch0b1ts is offline   QUOTE Thanks
Old 09-19-10, 12:16 AM   #7
CgS Drone
Member

 
CgS Drone's Avatar 

Join Date: Jul 2010
Location: SLC, UT.

 
Quote:
Originally Posted by ch0b1ts View Post
Actually, you can put 3x120mm Fans in the Top of the HAF 932.
????, it is made to accept two fans on the top. I see you own one but so do I and unless there is something different then I don't see how you are getting three fans in the top.

And for the love of god paint the inside of that case , I took everything out of mine and painted it black inside. I used gloss black I kind of wish I would have used flat black but its not bad.


__________________
C2D E8500, Gigabyte EP45-UD3P-------------955BE, TA890FXE, Cooler Master GX 750
Cooler Master 212+, Corsair 750TX----------HAF 932, Noctua D-14
HyperX T1 1066 5-5-5-15 (2x2GB)----------Geil Black Dragon (2x2GB)
MSI GTX 260, Raptor 75gb.------------------Gigabyte GTX 460, Seagate 500gb

>>>>>>>HeatWare<<<<<<<

Last edited by CgS Drone; 09-19-10 at 01:05 AM.
CgS Drone is offline   QUOTE Thanks
Old 09-19-10, 01:17 AM   #8
GreatSaski
Registered

 
GreatSaski's Avatar 

Join Date: Sep 2009
Location: South San Francisco, CA

 
Yup, 3x120mm fans fit on top. But part of the 3rd fan will be under the tray on top.

__________________
Case: Cooler Master Storm Enforcer
Motherboard: MSI Z77A-GD65
Processor: Intel 2500k @3.9ghz
Cooler: Corsair H50
Memory: Corsair Vengeance 8gb
Graphics Card: XFX HD 6950
Harddrive: WD Caviar Blue 500GB
Power Supply: Antec TruePower New TP-750 750W
Soundcard: Creative X-Fi Xtreme Gamer
GreatSaski is offline   QUOTE Thanks
Old 09-19-10, 01:38 AM   #9
CgS Drone
Member

 
CgS Drone's Avatar 

Join Date: Jul 2010
Location: SLC, UT.

 
Quote:
Originally Posted by GreatSaski View Post
Yup, 3x120mm fans fit on top. But part of the 3rd fan will be under the tray on top.
Noted, now I see what you both are talking about. Doesn't seem like it would do much with it buried under the tray.

__________________
C2D E8500, Gigabyte EP45-UD3P-------------955BE, TA890FXE, Cooler Master GX 750
Cooler Master 212+, Corsair 750TX----------HAF 932, Noctua D-14
HyperX T1 1066 5-5-5-15 (2x2GB)----------Geil Black Dragon (2x2GB)
MSI GTX 260, Raptor 75gb.------------------Gigabyte GTX 460, Seagate 500gb

>>>>>>>HeatWare<<<<<<<
CgS Drone is offline   QUOTE Thanks
Old 09-19-10, 08:57 AM   #10
houstonm
Member



Join Date: Aug 2010
Location: Louisiana

 
It should in theory reach, you would probably get better performance because it would allow the heat to rise if you set up the fans in exhaust.

__________________
Personal rig(RISEN FROM THE DEAD!):
-GTX 295
-MSI BigBang XPower -i7 960 OC 4.0ghz
-Corsair H50
-6gb G-skill 1600mhz RAM 7-7-7-20 -Coolermaster Silent Pro Gold 80+GOLD 1000W Certified PSU
-HAF 932
Workhorse Build(work use and TV show editing)
-i7 980X OC 3.66ghz -Xigmatek Dark Knight
-HD 4850 XFX 485X -2 monitors, 1 19" 1440x900 23" 1680x1050
-6GB G-skill 1333mhz 9-9-9-24 -Corsair HX 1000W Modular PSU
-Antec 1200(I HATE THIS CASE!)
houstonm is offline   QUOTE Thanks
Old 09-19-10, 10:16 AM   #11
ch0b1ts
Registered



Join Date: Feb 2010
Location: Washington DC

 
Quote:
Originally Posted by CgS Drone View Post
And for the love of god paint the inside of that case , I took everything out of mine and painted it black inside. I used gloss black I kind of wish I would have used flat black but its not bad.
LOL

Actually I plan on painting it when I do my next build around XMas Time. With this year's bonus, I plan on purchasing an EVGA Classified SR-2, a couple 5500 Series Xeons, and two GTX480s. Christmas present to me.

__________________
Sakura Miku: FX8320@4.8Ghz, Sabertooth 990FX R2, 16GB Corsair Dominator Platinum 2133, 256GB Samsung 840Pro SSD, 1TB Seagate Hybrid,MSI Twin Frozer R9-270X, Corsair 540 Air, Corsair H100i, Corsair AX760, Win 8.1
Snow Miku: MacBook Pro (15",2.66Ghz i7,8GB,1TB Hybrid,240GB SSD,10.9.1)
Miku: Mac MiniServer (2.53Ghz C2D,8GB,2x500GB RAID0,10.9.1)
ch0b1ts is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cases and Case Modding
Cases and Case Modding
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 11:59 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?