memory timing on Intel DX58SO

super2007 · Oct 16, 2010

Hi guys, I am running "OCZ3G1600LV6GK"

OCZ Gold 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

i am not sure if my memory is running on the correct timing's in the BIOS.

Please help me with that!

Screenshot of what i see in cpuz..not sure if its correct or wrong!

this is after i messed around with with some help

redduc900 · Oct 16, 2010

In the first pic. the RAM is running at DDR3-1066 (533MHz), and in the second at DDR3-1600 (800MHz) w/ the rated timings of 8-8-8-24. The rated DRAM voltage is 1.65V, but in the second pic. it shows 1.62V. If the system is Prime blend / Memtest86+ stable at that voltage then just leave it alone, otherwise increase the voltage to 1.65V. And you might also want to try changing the Command Rate from 2T to 1T for some additional bandwidth.

super2007 · Oct 16, 2010

redduc900 said:
In the first pic. the RAM is running at DDR3-1066 (533MHz), and in the second at DDR3-1600 (800MHz) w/ the rated timings of 8-8-8-24. The rated DRAM voltage is 1.65V, but in the second pic. it shows 1.62V. If the system is Prime blend / Memtest86+ stable at that voltage then just leave it alone, otherwise increase the voltage to 1.65V. And you might also want to try changing the Command Rate from 2T to 1T for some additional bandwidth.

Thank You!

i wanted 1.65v but my motherboard doens't give me that voltage. I see 1.66v or 1.7v. Also why would i need to change the command rate from 2t to 1t? what would be the difference?
Also i changed row refreash cycle time to 88 from 59

memory timing on Intel DX58SO

super2007

Member

redduc900

Inactive Moderator

super2007

Member

Similar threads