sata configuration

zinsco · 10-30-10, 02:37 AM

I have 2-ssd's in r0 on the Intel ICH10R controller and 2-hdd's in r1 on the sata 6G Marvell controller. Should I connect my CD drive to the Jmicron controller or the Intel ICH10R controller?

Psycogeec · 10-30-10, 03:57 AM

My opinion is to avoid the jmicron controller whenever possible.
other people have mentioned that even if you use it dont put the CD/DVD on it.

there can be minor advantages to using a seperate contoller for from-to data transfers, but that thing causes many problems, even problems when nothing is on it but its drivers are installed.

Randyman... · 10-31-10, 08:40 PM

Agreed. ICH10R = Teh Rule!

Jmtyra · 10-31-10, 11:08 PM

Quote:

Originally Posted by Randyman...

Agreed. ICH10R = Teh Rule!

This ^^

Plus you can then disable the other controller and decrease your boot time.

10-30-10, 02:37 AM	Thread Starter #1
zinsco Member Join Date: Sep 2007	sata configuration I have 2-ssd's in r0 on the Intel ICH10R controller and 2-hdd's in r1 on the sata 6G Marvell controller. Should I connect my CD drive to the Jmicron controller or the Intel ICH10R controller? __________________ Case: Corsair 800D PSU: Corsair HX1000W Mobo: Asus Rampage III CPU: i7 980x GPU: 2 x ATI 5970 CrossFire SSD: 4 x OCZ 128GB Vertex 4 Raid 0 \| HDD: 1 x WD 600GB VelociRaptor RAM: 6GB Super Talent DDR3-2000 CL 8-8-8-24 Fans: 11 x Scythe GentleTyphoon 120 x 25 - 1850 rpm \| 3 x NB-BlackSilentPro PK-3 140 x 25 - 1700 rpm Fan Controller: Lamptron 30W - 4 Channel (FC-5) \| Res: XSPC Dual Bay Loop 1: CPU + MB -- Black Ice GT Xtreme 140 rad \| XSPC 120 rad \| Black Ice GTX 92 rad \| Swiftech Apogee XT Block \| EK-FB RE3 Block \| MCP 355 pump Loop 2: GPU -- Feser X-Changer QUAD 480 rad \| 2x EK-FC5970 Blocks \| MCP355 pump
	QUOTE Thanks

10-30-10, 03:57 AM	#2
Psycogeec Member Join Date: Sep 2006	My opinion is to avoid the jmicron controller whenever possible. other people have mentioned that even if you use it dont put the CD/DVD on it. there can be minor advantages to using a seperate contoller for from-to data transfers, but that thing causes many problems, even problems when nothing is on it but its drivers are installed.
	QUOTE Thanks

10-31-10, 08:40 PM	#3
Randyman... Member Join Date: May 2004 Location: Houston, TX	Agreed. ICH10R = Teh Rule! __________________ Randy V - Audio-Dude/Musician/PC Guru/Crazy Guy PC#1 (Main Rig) : Lian Li PC-V1010 / P8Z68-V-GEN3 / 3750K @ 4.5GHz + Ven-X / 16GB G.Skill DDR3-1600 / HD5770 "XXX" 1GB / Samsung 830 256GB SSD / (6x) 2TB 5K3000 on Areca ARC1222 in RAID-6 / Seasonic X660 PSU / 2407WFP-HC / RME "Multiface" 38 Ch. Audio I/O / Dynaudio AIR-15 + AIR-BASE-2 Studio Monitors PC#2 (Realtime DAW) : Lian-Li PC-K65B / Sabertooth X79 / i7-3820 @ 4.8GHz + TRUE / 8GB RipJaws DDR3-2133 / HD6570 / 120GB Intel 520 / 4x 1TB on Areca ARC-1210 in RAID-5 / RME "HDSPe MADI" 128 Channel Audio I/O / 2x SSL AlphaLink MADI AX / 48 Mic Inputs + Fully-discrete Mic Preamps + 4260Watt PA System with 5x 18" JBL Subs :-) NAS#1: NSC-800 ITX Case / Asus P8H61-ITX / i3-2120 / (8x) 1TB 7200.12's in RAID-6 on Areca ARC-1220 Card NAS#2: 12TB ReadyNAS Ultra-4+ / (4x) 3TB 5K3000's And 7 other i7/i5/C2D/C2Q PC's
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

sata configuration

Internet Services

Website Development

Tech Hardware