Overclockers Forums > Hardware > Motherboards > Intel Motherboards
Intel Motherboards
Forum Jump

E-leet Tuning utility, how it works?

Post Reply New Thread Subscribe Search this Thread
Thread Tools
Old 02-03-11, 03:07 PM Thread Starter   #1
Just a nickname

Join Date: Aug 2010

E-leet Tuning utility, how it works?

I don't know if it is the good place to post this kind of question so feel free to move this topic in the good section.

Here is my problem:
I'd like to use manual voltage for turbo.
I can run stable at 1.05v @ 160x21GHz but need 1.141v @ 160x24 (turbo mode).

The easy solution is to set the voltage at 1.141v but it is then pointless to use turbo as I could run @ 190x20 at this voltage!

There is an option in the E-leet enabling me to set a Vcore boost for the turbo. The "Vcore boost" increase the voltage when windows require more processing juice.

When I asked EVGA if I could have this option in the BIOS, they replied:
"The voltage increases that you are attempting to implement are purely software based via E-leet. It is not an available option in the bios."

Thus, this let me think that if I could find the way how E-leet is "asking" the motherboard (or whatever it is) to increase the voltage, I could permanently boot with these settings (e-leet doesn't save or apply change for next boot).

Anyway, if you have any idea how to acheive this, I will send you 100xKudos

i5-750 @ 4.4GHz (and beyond), 1.368v under LinX & 1.225v VTT
EK supreme cooper, MCP655 with 2x360 swiftech
EVGA P55 classified 200
2x2Gb ECO G.skill 1600 7-8-7-24 @ 2000MHz 7-8-7-24 1.61v / 2100MHz 8-9-8-24 1.5v
XFX 5870 @ 960//1300 stock voltage
CM690 II
Samsung F3 spinpoint
Corsair 750W
Just a nickname is offline   QUOTE Thanks
Overclockers Approved
Which motherboard should you buy? Get the final word here. Check out the latest Overclockers reviews:
ASRock Z77 OC Formula Motherboard Review

ASRock teamed up with overclocker Nick Shih to make a high-end overclocking-based, yet functional for all users, motherboard named the Z77 OC Formula. It appears they have achieved it. Read More.

Get it at NewEgg for $239.99
ASUS Maximus V Formula Motherboard

The Maximus V Formula is part of the ROG (Republic of Gamers) series of motherboards, which in itself brings a high level of expectation. It's a no brainer, Overclockers Approved! Read more.

Get it at NewEgg for $279.99
Old 02-03-11, 03:14 PM   #2

psionic98's Avatar 

Join Date: Jun 2009
Location: 4th Floor office, East Coast

Without backwards engineering the ELEET util it would be hard to figure out what kinds of codes its passing to the BIOS to tell it to increase/decrease the voltages on the fly like it does. I don't know if what you want to do would even be possible w/o a 3rd party application to run things.

eleet doesnt autorun, and even if it did it reads the BIOS as-is and displays current settings. The only thing I could think to do, which isn't what you want, is set the BIOS to run at 1.14, drop eleet.exe into your startup folder, after it starts up drop the volt down to 1.05 and apply settings. Obviously this isn't efficient, but without knowing the coding it's using I think it may be the best option.

Though thinking about it more that would only work at non-turbo settings.. so it may not work at all.

disable turbo and run at 1.05 all the time Turbo only affects 1 core and most apps use more than 1 anymore!

EVGA x58 Micro (756) / i7 D0 @ 4.0, 1.278v w/HT (Air)
2x 300GB V-rap raid0, WD Caviar Black 640GB & 1TB
HIS 6950 @ 840/1450
Mushkin 6GB @ 6-7-6-18
/ Enermax 720 Modular
HAF 922 / Noctua D14Win7 Pro x64 / Mint 10
i7(x58) OC'ing/Info
/ AMD Oc'ing/Info / C2D/C2Q OC'ing/Info
Recommended Power Supply Listing
psionic98 is offline Heatware Profile   QUOTE Thanks

Post Reply New Thread Subscribe

Overclockers Forums > Hardware > Motherboards > Intel Motherboards
Intel Motherboards
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Mobile Skin
All times are GMT -5. The time now is 04:05 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!

Welcome to

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!

(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?