[ots_ots]

Hi ! i've just built my own CPU , then completed building and connected everything to my monitor. All the CPU was working , LED turned on , fans working. But my monitor did not display anything.
note: when i turn on my CPU , i did not hear any "beep" sound when start a computer.
anyone help me please. I do not know what wrong really are. please...thanks

detail :
-Diablotek PHD Series PHD550 550W ATX12V V2.2 Power Supply
-G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Dual Channel Kit Desktop Memory Model F3-10666CL9D-4GBNQ
-AMD Phenom II X4 925 Deneb 2.8GHz Socket AM3 95W Quad-Core Processor HDX925WFGMBOX
-Western Digital Caviar Green WD7500AADS 750GB SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive
-ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
-ASUS M4N68T-M V2 AM3 NVIDIA Geforce 7025/nForce 630a Micro ATX AMD Motherboard

[vdgamer]

I think i see your problem, where is the graphics card?

[4GHZ_or_bust]

Originally Posted by vdgamer

I think i see your problem, where is the graphics card?

motheroard has onboard VGA.

I'd check the monitor, make sure it is plugged in and powered on. Check it on a different PC.

If the monitor is OK, try clearing CMOS as it may be set to not use onboard video.

[psionic98]

make sure you plugged in the system speaker (its a separate plug on most pcs now) should be a small black or silver circle with 2 wires hanging off it..

if thats hooked up and you're not getting any beeps, remove all your ram so its just CPU/HDD plugged in.. you should certainly hear some kind of beep for missing ram.. just to rule out a dead mobo