I've been looking for somewhere to get some supplies locally today to fix my condensation problem. I believe mouse pads are made of air proof insulation. Mouse pad
Now just need to find some dielectric grease.
Depending on the temps you are working at will determine the thickness of the insulation needed. I glued a double layer of mousemat material to my w/b and this was fine for coolant temps down to about -5C but when I went to -25C I found condensation forming on the outside of this and have now put in closed foam pipe insulation out side the original insulation which is about 12mm thick and works well. This is available at most hardware stores. Dielectric grease I got from my local motor spares shop.
Hope this helps.
A well stocked hardware store should have various thickness neoprene availble. Danger Den is the only source I have found for 1/16" neoprene to use around the CPU die.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.