Problem overclocking i530

nicloco · 06-12-11, 03:01 AM

Hi everyone! i'm new in the forum! i realy like this forum...
My ring is:
I3 530 2.93 1156
Gigabyte P55A-UD4P F-14
4GB (2x2) Corsiar Dominator 1600mhz 9-9-9-24
Zotac GTS 250
Corsiar AX750
Scythe mugen 2 reb.B
the pc is one year old and the psu is new, one week (is have 2 connection for ATX/EPS anyone knows which i need to use, the connections to the psu are different one is 6 pin and another 8 pin?????)

i already overclock this pc, to:
CPU 3600
MUL 20
BLK 180
QPI 3960
Vcore 1.200 (bios)
Memory Speed 1800
Temps:
Max load: CPU 47c, 44c
Chipset: 43c
another temp just stay in 25c
Like this is realy a rock stable

now my problem is when i tray to raise the cpu clock to 4.0 or more, i can't get it stable i traied also puting down the memory and the qpi, raising the Vcore to 1.35, QPI/VTT to 1.35, and nothing help, i have problems with windows (blue screen) or problems with the bios, (just getting to default conf) yesterday i put new thermal grease both chipset and cpu.

I have another problem, always when i change MIT conf in bios, the pc shut down and then start again with the new conf, is this ok?

thank you for your answer and i'm sorry for my english, it's not my native lenguage...

SamSaveMax · 06-12-11, 03:16 AM

How do you set your ram's timimgs for 4GHz?
Try up vcore 1.37550 to 1.39

nicloco · 06-12-11, 03:20 AM

My timings are the same 9-9-9-24, if i change to 10-10-10-26, it's not really helping!

SamSaveMax · 06-12-11, 04:02 PM

I should have ask for screenshots of Memory tab and SPD from CPUz at 4GHz.

Are your rams rated 1800MHz...or is it being overclocked by 200MHz at 3.6GHz?

Try 22x multiplier instead of 20x.
Reduce memory speed ratio to 2:8 and test it from there.

nicloco · 06-13-11, 01:34 PM

after a day tring to overclock over 4.0ghz, i just can do 4.27, with 225x19, i want this becouse i want the ram to run 1800mhz, i really can't do 4.5, i tried 1.4175v. on vcore, and i just can boot windows... i ran 14hs of prime with the same conf of the pic but with qpi 3.6, now it's just 1hs and did't fail!!!! any suggestion?? i think that with air and in summer it's good enough...

SamSaveMax · 06-13-11, 03:55 PM

Try to stress that with wPrime 1024M or Cinebench R11.5

nicloco · 06-14-11, 06:37 AM

this i think is my best, i try 4.5 speed and i can't boot windows, and with 5 QPI i can't boot even bios... another question, wich is the real vcore, the bios one that i can change, o the vcore of cpuz?

06-12-11, 03:01 AM	Thread Starter #1
nicloco New Member Join Date: Jun 2011	Problem overclocking i530 Hi everyone! i'm new in the forum! i realy like this forum... My ring is: I3 530 2.93 1156 Gigabyte P55A-UD4P F-14 4GB (2x2) Corsiar Dominator 1600mhz 9-9-9-24 Zotac GTS 250 Corsiar AX750 Scythe mugen 2 reb.B the pc is one year old and the psu is new, one week (is have 2 connection for ATX/EPS anyone knows which i need to use, the connections to the psu are different one is 6 pin and another 8 pin?????) i already overclock this pc, to: CPU 3600 MUL 20 BLK 180 QPI 3960 Vcore 1.200 (bios) Memory Speed 1800 Temps: Max load: CPU 47c, 44c Chipset: 43c another temp just stay in 25c Like this is realy a rock stable now my problem is when i tray to raise the cpu clock to 4.0 or more, i can't get it stable i traied also puting down the memory and the qpi, raising the Vcore to 1.35, QPI/VTT to 1.35, and nothing help, i have problems with windows (blue screen) or problems with the bios, (just getting to default conf) yesterday i put new thermal grease both chipset and cpu. I have another problem, always when i change MIT conf in bios, the pc shut down and then start again with the new conf, is this ok? thank you for your answer and i'm sorry for my english, it's not my native lenguage...
	QUOTE Thanks

06-12-11, 03:16 AM	#2
SamSaveMax Join Date: Dec 2008	How do you set your ram's timimgs for 4GHz? Try up vcore 1.37550 to 1.39 __________________ E8500_oc @4.21GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| Q8200_oc @3.40GHz E8400_oc @4.20GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| . i3-540_oc My Cheap Overclocker E7200_oc @3.54GHz via- padmod \|-\|-\|-\|-\|-\|-\|-\| i3-530_oc @ 4.34GHz My Cheap Ride i5-750_oc_185bclk_+_TURBO_ENABLED = 9x @ 1.66GHz \| 21x @ 3.89GHz \| 24x @ 4.44GHz -OR- 4.52GHz non-Turbo i7-930_oc_My New Toy
	QUOTE Thanks

06-12-11, 03:20 AM	Thread Starter #3
nicloco New Member Join Date: Jun 2011	My timings are the same 9-9-9-24, if i change to 10-10-10-26, it's not really helping!
	QUOTE Thanks

06-12-11, 04:02 PM	#4
SamSaveMax Join Date: Dec 2008	I should have ask for screenshots of Memory tab and SPD from CPUz at 4GHz. Are your rams rated 1800MHz...or is it being overclocked by 200MHz at 3.6GHz? Try 22x multiplier instead of 20x. Reduce memory speed ratio to 2:8 and test it from there. __________________ E8500_oc @4.21GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| Q8200_oc @3.40GHz E8400_oc @4.20GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| . i3-540_oc My Cheap Overclocker E7200_oc @3.54GHz via- padmod \|-\|-\|-\|-\|-\|-\|-\| i3-530_oc @ 4.34GHz My Cheap Ride i5-750_oc_185bclk_+_TURBO_ENABLED = 9x @ 1.66GHz \| 21x @ 3.89GHz \| 24x @ 4.44GHz -OR- 4.52GHz non-Turbo i7-930_oc_My New Toy
	QUOTE Thanks

06-13-11, 01:34 PM	Thread Starter #5
nicloco New Member Join Date: Jun 2011	after a day tring to overclock over 4.0ghz, i just can do 4.27, with 225x19, i want this becouse i want the ram to run 1800mhz, i really can't do 4.5, i tried 1.4175v. on vcore, and i just can boot windows... i ran 14hs of prime with the same conf of the pic but with qpi 3.6, now it's just 1hs and did't fail!!!! any suggestion?? i think that with air and in summer it's good enough...
	QUOTE Thanks

Problem overclocking i530

Internet Services

Website Development

Tech Hardware

06-13-11, 03:55 PM	#6
SamSaveMax Join Date: Dec 2008	Try to stress that with wPrime 1024M or Cinebench R11.5 __________________ E8500_oc @4.21GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| Q8200_oc @3.40GHz E8400_oc @4.20GHz Vdroop MOD \|-\|-\|-\|-\|-\|-\|-\| . i3-540_oc My Cheap Overclocker E7200_oc @3.54GHz via- padmod \|-\|-\|-\|-\|-\|-\|-\| i3-530_oc @ 4.34GHz My Cheap Ride i5-750_oc_185bclk_+_TURBO_ENABLED = 9x @ 1.66GHz \| 21x @ 3.89GHz \| 24x @ 4.44GHz -OR- 4.52GHz non-Turbo i7-930_oc_My New Toy
	QUOTE Thanks

06-14-11, 06:37 AM	Thread Starter #7
nicloco New Member Join Date: Jun 2011	this i think is my best, i try 4.5 speed and i can't boot windows, and with 5 QPI i can't boot even bios... another question, wich is the real vcore, the bios one that i can change, o the vcore of cpuz?
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search