Volt mod hardware question....

torin3 · 06-14-11, 11:22 AM

Are these good trimmers for a 8800 GT volt mod?

http://search.digikey.com/scripts/Dk...3006Y-502LF-ND

Q56_Monster · 06-23-11, 07:50 PM

That's a 5k Ohm VR, you need a 500 Ohm for vgpu.

Also try Mouser electronics out of Texas. They're relatively cheap and ship quick.

torin3 · 06-24-11, 06:34 PM

Quote:

Originally Posted by Q56_Monster

That's a 5k Ohm VR, you need a 500 Ohm for vgpu.

Also try Mouser electronics out of Texas. They're relatively cheap and ship quick.

Yeah, I realized at the benching party that I had the ohms range wrong. I buy mainly from Digi-Key because they are closer and USPS stuff gets to me faster. But I also buy from Mouser if they have better prices or stock that Digi-Key doesn't.

06-14-11, 11:22 AM	Thread Starter #1
torin3 Member Join Date: Dec 2004 Location: Seeing how many GPUs I can cram in one box	Volt mod hardware question.... Are these good trimmers for a 8800 GT volt mod? http://search.digikey.com/scripts/Dk...3006Y-502LF-ND __________________ Please fold for Team 32! Board: EVGA 4-Way SLI Classified (E762) Memory: GSkill Ripjaws 6x2GB DDR3 CPU: i7 970 at 4.26Ghz Video card: 2x EVGA GTX 460 Cooling: EK Eddy CPU block and full coverage motherboard block & 2 120mmx240mm heater cores. My Heat
	QUOTE Thanks

06-23-11, 07:50 PM	#2
Q56_Monster New Member Join Date: May 2011 Location: Philly Suburbs	That's a 5k Ohm VR, you need a 500 Ohm for vgpu. Also try Mouser electronics out of Texas. They're relatively cheap and ship quick.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Volt mod hardware question....

Internet Services

Website Development

Tech Hardware