Comment on my WCing build

I originally posted this on [H], but hoping I can get some more input from the WCing community here to comment on this build. I've been researching this build for a few weeks now...

This is gonna be my second time around building a WCing rig. I am going to be using a 3x 120MM rad, with MB block, mosfet, CPU and GPU with 3x Scythe S-Flex G fans on an Aquaero 4. This is all going to be going in on a Corsair 800D case with a EVGA Classified3 770 board, but don't know if a single Aquastream XT is enough.

I am planing the loop to go Res -> Pump -> Rad -> Mosfet -> CPU -> MB -> GPU -> Res

These I own:
1x Black Ice SR1 360 rad (bought)
10ft of Primochill 1/2" ID 3/4" OD tubing (bought)
Aquacomputer Aquagfx for 8800GTS (previously owned, now going to be for Physx)
Aquaero 4 LCD (previously owned)
Core i7 920 D0 stepping (own)
6GB G.Skill DDR3-1600 (own)

These I am planing in buying:

EK-Multioption RES X2 250ML Advanced
Heatkiller v3.0 Ni-BL for 1366 with backplate
Bitspower Black Freezer MB block
Bitspower Black Freezer Mosfet block
Aquacomputer Aquastream XT USB 12v Pump
1x IandH silver KillCoil
4x Bitspower G1/4 1/2" ID 3/4" OD 45 Degree compression fittings
7x Bitspower G1/4 1/2" ID 3/4" OD compression fittings

What is the flow and head pressure of that pump? You got lots of flow restriction in the setup.

Conumdrum said:

What is the flow and head pressure of that pump? You got lots of flow restriction in the setup.

Click to expand...

This is the comparison I found on RRTech, but not sure about head pressure:





Source is from some German forum: http://www.hardwareluxx.de/communit...s-eheim-1046-station-ii-hydor-l20-511621.html

Ack RR? Okay.

What about info at Xtreme Systems? They have quite a few EU members there.