controller question / request

obryand · 09-13-11, 12:15 PM

controller question / request

I have a question that you may be able to help me out with, I am looking to control two things with a computer while only needing to press "start" once.

One of the things I would like to control is a mechanical traction table which you can view from the link below, it is basically a mechanical massage table that you lay on. You turn the timer dial from 1- 30 minutes to turn it on. After the timer dials down it turns off automatically.

The other is a small clip (10 min) on a DVD, that can be played on the computer using any of the popular video players.

The goal is to have the people lay on the table, press the play/start button on the screen and it starts the traction table and the video together. After the 8 minutes is up the video will stop as will the massage table. It will reset on its own for the next person to lay on it and press play/start again.

If you could tell me if you sell something like this, can produce this, or know of anyone else who may be able to help me out with this I would greatly appreciate it. Any additional information that you need please email me at obryanatlife (at) yahoo.

Thanks

Traction Table
http://www.pivotalhealthsolutions.co...le-att300.aspx

Jmtyra · 09-13-11, 01:58 PM

Welcome to the forum obryand,

Are these two computers on the same network? If so, you could use HotkeyNet. It's free, and it works wonderfully. Takes a small bit of understanding to get it setup, but it's fairly easy to get going. You might also want to take a look at Synergy as well. It's also free.

obryand · 09-13-11, 02:53 PM

It is actually one computer that runs the real player or similar DVD player on it and was hoping to be able to control the starting/stopping of the massage table by the same computer.

Jmtyra · 09-13-11, 02:54 PM

And the only way to start/stop the massage table is via a physical button?

Bobnova · 09-13-11, 04:04 PM

Add an Arduinoy interface and the computer can very easily control a mechanical button.

Jmtyra · 09-13-11, 06:24 PM

Quote:

Originally Posted by Bobnova

Add an Arduinoy interface and the computer can very easily control a mechanical button.

This site?

http://www.arduino.cc/

If so, wow, awesome. Just looking at the hardware gives me some very interesting ideas about custom mods and such.

Thanks bobnova!

09-13-11, 12:15 PM	Thread Starter #1
obryand New Member Join Date: Sep 2011	controller question / request controller question / request I have a question that you may be able to help me out with, I am looking to control two things with a computer while only needing to press "start" once. One of the things I would like to control is a mechanical traction table which you can view from the link below, it is basically a mechanical massage table that you lay on. You turn the timer dial from 1- 30 minutes to turn it on. After the timer dials down it turns off automatically. The other is a small clip (10 min) on a DVD, that can be played on the computer using any of the popular video players. The goal is to have the people lay on the table, press the play/start button on the screen and it starts the traction table and the video together. After the 8 minutes is up the video will stop as will the massage table. It will reset on its own for the next person to lay on it and press play/start again. If you could tell me if you sell something like this, can produce this, or know of anyone else who may be able to help me out with this I would greatly appreciate it. Any additional information that you need please email me at obryanatlife (at) yahoo. Thanks Traction Table http://www.pivotalhealthsolutions.co...le-att300.aspx
	QUOTE Thanks

09-13-11, 01:58 PM	#2
Jmtyra Premium Member #21 Join Date: Aug 2010 Location: Dallas/Fort-Worth	Welcome to the forum obryand, Are these two computers on the same network? If so, you could use HotkeyNet. It's free, and it works wonderfully. Takes a small bit of understanding to get it setup, but it's fairly easy to get going. You might also want to take a look at Synergy as well. It's also free. __________________ Team 32 Super Sticky -- 4P Mega Thread -- EVGA SR-2 Build -- ASUS Z8NA-D6 Build
	QUOTE Thanks

09-13-11, 02:53 PM	Thread Starter #3
obryand New Member Join Date: Sep 2011	It is actually one computer that runs the real player or similar DVD player on it and was hoping to be able to control the starting/stopping of the massage table by the same computer.
	QUOTE Thanks

09-13-11, 02:54 PM	#4
Jmtyra Premium Member #21 Join Date: Aug 2010 Location: Dallas/Fort-Worth	And the only way to start/stop the massage table is via a physical button? __________________ Team 32 Super Sticky -- 4P Mega Thread -- EVGA SR-2 Build -- ASUS Z8NA-D6 Build
	QUOTE Thanks

09-13-11, 04:04 PM	#5
Bobnova Air Superiority Senior Member Benching Team Leader Join Date: May 2009 Location: Humboldt	Add an Arduinoy interface and the computer can very easily control a mechanical button. __________________ "Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe." -- Einstein (maybe) How to check your PSU with a multimeter. 17bXw5t51rEBXGavJFMJsC8g7HQgThUGc7 Heatware.
	QUOTE Thanks

controller question / request

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search