- Joined
- Dec 8, 2010
Here is the setup from my rig, which i like to think is maximum for stability and daily use with this board and a 500w stock PSU:
If anyone has any suggestions i wouzld be glad to oblige XD
Hardware:
ECS a75f-a Black
APU a8-3850
2x2gb G.Skill Pi series 2400ddr3 with turbulance fans
aegir xigmatec
spinpoint f3 500gb with Spire HDD cooler
3x Schyte 1900rpm 140mm fans, all blowing in
Setup:
IGP to auto(stays around 512mb), video output do IGD
CPU multi to 24x (vid=8), cpu volt to +90mw
Clock to 140mhz
Ram to 800(1600) (+40%=2242), timings to manual 8-11-8-28 1t or 2t both work, voltage to 1,65
IGD manual overclocking off(let it folow fsb) end result 840mhz
Temps stay well below 38'C on 30min full stress test using AIDA64
Motherboard reading is wrong its always stuck on 39'C
Here are the pics:
If anyone has any suggestions i wouzld be glad to oblige XD
Hardware:
ECS a75f-a Black
APU a8-3850
2x2gb G.Skill Pi series 2400ddr3 with turbulance fans
aegir xigmatec
spinpoint f3 500gb with Spire HDD cooler
3x Schyte 1900rpm 140mm fans, all blowing in
Setup:
IGP to auto(stays around 512mb), video output do IGD
CPU multi to 24x (vid=8), cpu volt to +90mw
Clock to 140mhz
Ram to 800(1600) (+40%=2242), timings to manual 8-11-8-28 1t or 2t both work, voltage to 1,65
IGD manual overclocking off(let it folow fsb) end result 840mhz
Temps stay well below 38'C on 30min full stress test using AIDA64
Motherboard reading is wrong its always stuck on 39'C
Here are the pics:
