H100 RAD + H70 RAD+ H100 pump & 5.25"RES MOD

salsoul · 01-16-12, 08:46 AM

Hello,

I have an idea and im not sure how to make it work.

I currently have a H100 cooler & H70 cooler.

What I want to do it to run both rads with the H100 pump and a 5.25" dual Res with pump.

Here is a very rough drawing very rough. you may have to zoom to see text

Flow will go RES>CPU PUMP>RAD>RAD>RES

What do you guys think, ?

Sorry forgot to add pic

regards

Sal.

thideras · 01-16-12, 11:55 AM

It is an interesting idea, but you'd probably be better off selling the two kits and building your own loop.

salsoul · 01-16-12, 12:37 PM

Quote:

Originally Posted by thideras

It is an interesting idea, but you'd probably be better off selling the two kits and building your own loop.

You could be right, I just went to the local pc shop and they dont have any tubing 6mm ID 8mm OD its starts @ 12mm ID they got a display setup with phobia kit with rad/pump/fans/res/coldplate/ all phobia.

Ive been reading the guide on here about the H*** series mODs and wanted to take it a step further with 2 rads for extra cooling. Im going to try the local plumbers shop (again just around the corner from me ) and see if I can get the right 6mm ID tubing first. Does anyone know if the barbs on the H70/100 are removable and upgradable ? If I want to increase the barb from 6mm to say 12mm. I am assuming the threaded diameter is a standard size but the barb can differ.

bmwbaxter · 01-16-12, 12:40 PM

The barbs are not changable. I just modded my H100, I can post a detailed picture of one later to show what I mean.

salsoul · 01-16-12, 12:43 PM

Quote:

Originally Posted by bmwbaxter

The barbs are not changable. I just modded my H100, I can post a detailed picture of one later to show what I mean.

Ah ok thanks, no need for photo It was worth a try

guess the local plumbers are a good bet then. just need to find a good dualbay 5.25" Res with low noise pump. the one they had in the shop was an XSPC but didnt come with a pump.

Any suggestions ?

ssjwizard · 01-16-12, 09:35 PM

The H100 pump/waterblock is all you will need in this loop.

salsoul · 01-17-12, 03:04 AM

Quote:

Originally Posted by ssjwizard

The H100 pump/waterblock is all you will need in this loop.

not where Im going it wont :P its at its limits now !

ziggo0 · 01-17-12, 11:47 AM

You know, MCP355 is a pretty small pump, and you got a res...why bother keeping the corsair setup? Infact I think you can get a MCP355 built into a res or a res that attachs to the mcp355...

ssjwizard · 01-17-12, 11:48 AM

Then you shouldnt even bother with using it. A proper waterblock and a DDC variant is what you really want then that what you should use. Running a high quality pump into a lower quality pump is just asking for losses and problems.

salsoul · 01-17-12, 11:58 AM

Well I've gone ahead and done it. Leak testing now !!! How long do I leak test for ? 1 hr 2 hr ?

ssjwizard · 01-17-12, 12:00 PM

1-2 hours minimum, some people suggest 24 hours with paper towels under all of your parts to make any small leaks more evident.

salsoul · 01-17-12, 12:02 PM

I've just used the h100 pump and an xspc single res no pump. All working well at the moment.

I measured about 250ml to 300ml per mInute testing the h100 pump. There was only 250-300ml in the h100 rad

salsoul · 01-17-12, 12:04 PM

Quote:

Originally Posted by ssjwizard

1-2 hours minimum, some people suggest 24 hours with paper towels under all of your parts to make any small leaks more evident.

That's exactly what im doing. Anyway to add pics via iPhone

no pc available lol

bmwbaxter · 01-17-12, 12:08 PM

Ensure you are using some type of corrosion inhibitor since the rad is aluminum and the block is copper.

salsoul · 01-17-12, 12:10 PM

Quote:

Originally Posted by bmwbaxter

Ensure you are using some type of corrosion inhibitor since the rad is aluminum and the block is copper.

Thermochill ec6 is what I'm using

salsoul · 01-17-12, 12:15 PM

Bloody iPhone can't upload pics . Ok

I'm gonna leak test for 30 more mins and put it back together then hopefully upload pics.

My loop capacity has increased to nearly. 700ml from 300ml just on the h100.
That should help cooling.

salsoul · 01-17-12, 01:22 PM

Oh my god I'm sh**ing myself. Don't want to turn it on incase it goes boom

If you don't here from me you know why lol
Wish me luck. Hopefully see you in 5mins.
Once I build up enough courage to turn on

gilval · 01-17-12, 01:48 PM

Anyone heard the boom?

EarthDog · 01-17-12, 01:50 PM

I heard it from the triple post, yes.......

salsoul · 01-17-12, 02:09 PM

Quote:

Originally Posted by gilval

Anyone heard the boom?

not in this lifetime

Quote:

Originally Posted by EarthDog

I heard it from the triple post, yes.......

I was mearly getting excited aswell as anxious/nervous.

well im still here, sorry to dissapoint all the doom trolls lol

I have made a couple of mistakes but nothing too drastic, ive used far to much tubing, I thought at the time it was better to over estimate than under, i will run it like this for a while and in a couple of months or so re cut the tubing and re-bleed.

here are some pics if anyone is interested ? sorry bout the qaulity iphone camera sux.

01-16-12, 08:46 AM	Thread Starter #1
salsoul Member Join Date: Dec 2011 Location: UK	H100 RAD + H70 RAD+ H100 pump & 5.25"RES MOD Hello, I have an idea and im not sure how to make it work. I currently have a H100 cooler & H70 cooler. What I want to do it to run both rads with the H100 pump and a 5.25" dual Res with pump. Here is a very rough drawing very rough. you may have to zoom to see text Flow will go RES>CPU PUMP>RAD>RAD>RES What do you guys think, ? Sorry forgot to add pic regards Sal. Attached Images __________________ \|AMD FX 8150p @ 4.81Ghz @ 1.437v HT 2618Mhz NB 2618Mhz (stable) 1.325v\|LLC Full Calibration\|\|Asus Crosshair IV-Extreme {MB}\|\|Asus Ares 5870x2 {GFX}850/1200 stock\|\|+ PCS HD5870 TrifireX {GFX}875/1225 factory OC\|\|8GB Gskill DDR3 Trident F3- 1940Mhz @8-8-8-24{RAM}1.650v\|\|Crucial SSD M3 128Gb sataIII{SysDrive} \|CoolermasterM1000w{PSU}\|\|H100/H70-MOD XSPC-Res {COOLING}\|\|Max Temp:Core 58c NZXT phantom {CASE}\|\|5760x1080 Eyefinity Landscape 25"x3 \| Last edited by salsoul; 01-16-12 at 09:15 AM.
	QUOTE Thanks

01-16-12, 11:55 AM	#2
thideras Banned Neckbeard Moderator Premium Member #3 Join Date: May 2006 Location: South Dakota	It is an interesting idea, but you'd probably be better off selling the two kits and building your own loop. __________________ Desktop: Gigabyte Z77X-UD5H \| 3570k 4.6 GHz \| 32 GB GSkill Ares \| GTX 570 \| 180 GB Intel & 2 TB total \| Arch Linux and Windows 7 Main server: 37 TB raw disk \| 2x Opteron 6134 \| Asus KGPE-D16 \| 48 GB RAM \| LSI 8708EM2 \| CentOS 6.2 VM Server 1: Dell R510 \| 2x E5645 \| 128 GB RAM \| 4x 300 GB Velociraptor \| Xen Cloud Platform (XCP) VM Server 2: Dell R710 \| 2x E5645 \| 288 GB RAM \| 8x 300 GB Velociraptor \| Xen Cloud Platform (XCP) "That's not overkill, or a lot. That's just thiderastic." -txus.palacios Current projects: Rackmount Overkill (New) \| 30/45 hard drive server Articles: Rack Mounting 101 \| Dell Perc 5/i Throughput Benchmarks Past projects: Software RAID \| The Dragon Case My Website *Want to talk directly to all* the moderators at once? Call the Mod Hotline!**
	QUOTE Thanks

01-16-12, 12:40 PM	#4
bmwbaxter Premium Member #5 Join Date: Jun 2010 Location: London, Ontario, Canada	The barbs are not changable. I just modded my H100, I can post a detailed picture of one later to show what I mean.
	QUOTE Thanks

01-16-12, 09:35 PM	#6
ssjwizard Member Join Date: Mar 2002 Location: Rio Rancho, NM	The H100 pump/waterblock is all you will need in this loop. __________________ Life is what you make of it, we exist for the sole purpose of existing. Dont waste the universe efforts! All statements, imagery, and ideas contained within any posts are merely retold tales of fictional acts by a figment of the universe imagination. So your looking for an AMD FX motherboard, things you need to know. Whats the max safe temps/volts for an FX? Green Gorilla, CM 690-II nVidia, FX 8320, GTX 670, liquid cooled Liquid Fusion, CM 690-II, A8+6670 Dual GFX, liquid cooled Extreme evaporative water loop 450mm^3 water cooled beast - Incomplete
	QUOTE Thanks

01-17-12, 11:47 AM	#8
ziggo0 Member Join Date: Apr 2004 Location: La Porte, Indiana	You know, MCP355 is a pretty small pump, and you got a res...why bother keeping the corsair setup? Infact I think you can get a MCP355 built into a res or a res that attachs to the mcp355... __________________ My Heatware
	QUOTE Thanks

H100 RAD + H70 RAD+ H100 pump & 5.25"RES MOD

Internet Services

Website Development

Tech Hardware

01-17-12, 11:48 AM	#9
ssjwizard Member Join Date: Mar 2002 Location: Rio Rancho, NM	Then you shouldnt even bother with using it. A proper waterblock and a DDC variant is what you really want then that what you should use. Running a high quality pump into a lower quality pump is just asking for losses and problems. __________________ Life is what you make of it, we exist for the sole purpose of existing. Dont waste the universe efforts! All statements, imagery, and ideas contained within any posts are merely retold tales of fictional acts by a figment of the universe imagination. So your looking for an AMD FX motherboard, things you need to know. Whats the max safe temps/volts for an FX? Green Gorilla, CM 690-II nVidia, FX 8320, GTX 670, liquid cooled Liquid Fusion, CM 690-II, A8+6670 Dual GFX, liquid cooled Extreme evaporative water loop 450mm^3 water cooled beast - Incomplete
	QUOTE Thanks

01-17-12, 11:58 AM	Thread Starter #10
salsoul Member Join Date: Dec 2011 Location: UK	Well I've gone ahead and done it. Leak testing now !!! How long do I leak test for ? 1 hr 2 hr ?
	QUOTE Thanks

01-17-12, 12:00 PM	#11
ssjwizard Member Join Date: Mar 2002 Location: Rio Rancho, NM	1-2 hours minimum, some people suggest 24 hours with paper towels under all of your parts to make any small leaks more evident. __________________ Life is what you make of it, we exist for the sole purpose of existing. Dont waste the universe efforts! All statements, imagery, and ideas contained within any posts are merely retold tales of fictional acts by a figment of the universe imagination. So your looking for an AMD FX motherboard, things you need to know. Whats the max safe temps/volts for an FX? Green Gorilla, CM 690-II nVidia, FX 8320, GTX 670, liquid cooled Liquid Fusion, CM 690-II, A8+6670 Dual GFX, liquid cooled Extreme evaporative water loop 450mm^3 water cooled beast - Incomplete
	QUOTE Thanks

01-17-12, 12:02 PM	Thread Starter #12
salsoul Member Join Date: Dec 2011 Location: UK	I've just used the h100 pump and an xspc single res no pump. All working well at the moment. I measured about 250ml to 300ml per mInute testing the h100 pump. There was only 250-300ml in the h100 rad
	QUOTE Thanks

01-17-12, 12:08 PM	#14
bmwbaxter Premium Member #5 Join Date: Jun 2010 Location: London, Ontario, Canada	Ensure you are using some type of corrosion inhibitor since the rad is aluminum and the block is copper.
	QUOTE Thanks

01-17-12, 12:15 PM	Thread Starter #16
salsoul Member Join Date: Dec 2011 Location: UK	Bloody iPhone can't upload pics . Ok I'm gonna leak test for 30 more mins and put it back together then hopefully upload pics. My loop capacity has increased to nearly. 700ml from 300ml just on the h100. That should help cooling. __________________ \|AMD FX 8150p @ 4.81Ghz @ 1.437v HT 2618Mhz NB 2618Mhz (stable) 1.325v\|LLC Full Calibration\|\|Asus Crosshair IV-Extreme {MB}\|\|Asus Ares 5870x2 {GFX}850/1200 stock\|\|+ PCS HD5870 TrifireX {GFX}875/1225 factory OC\|\|8GB Gskill DDR3 Trident F3- 1940Mhz @8-8-8-24{RAM}1.650v\|\|Crucial SSD M3 128Gb sataIII{SysDrive} \|CoolermasterM1000w{PSU}\|\|H100/H70-MOD XSPC-Res {COOLING}\|\|Max Temp:Core 58c NZXT phantom {CASE}\|\|5760x1080 Eyefinity Landscape 25"x3 \|
	QUOTE Thanks

01-17-12, 01:22 PM	Thread Starter #17
salsoul Member Join Date: Dec 2011 Location: UK	Oh my god I'm sh**ing myself. Don't want to turn it on incase it goes boom If you don't here from me you know why lol Wish me luck. Hopefully see you in 5mins. Once I build up enough courage to turn on __________________ \|AMD FX 8150p @ 4.81Ghz @ 1.437v HT 2618Mhz NB 2618Mhz (stable) 1.325v\|LLC Full Calibration\|\|Asus Crosshair IV-Extreme {MB}\|\|Asus Ares 5870x2 {GFX}850/1200 stock\|\|+ PCS HD5870 TrifireX {GFX}875/1225 factory OC\|\|8GB Gskill DDR3 Trident F3- 1940Mhz @8-8-8-24{RAM}1.650v\|\|Crucial SSD M3 128Gb sataIII{SysDrive} \|CoolermasterM1000w{PSU}\|\|H100/H70-MOD XSPC-Res {COOLING}\|\|Max Temp:Core 58c NZXT phantom {CASE}\|\|5760x1080 Eyefinity Landscape 25"x3 \|
	QUOTE Thanks

01-17-12, 01:48 PM	#18
gilval Registered Join Date: Jan 2012	Anyone heard the boom? __________________ Current Rig: Core i7 920, ATI 4870, 6GB Corsair XMS3, Asus P6T SE Mobo
	QUOTE Thanks

01-17-12, 01:50 PM	#19
EarthDog Senior PITA Member Overclockers.com Editor Join Date: Dec 2008 Location: Stuck in Maryland...	I heard it from the triple post, yes....... __________________ Should I R0 my SSD? / SandyBridge / Ivybridge Overclocking Guide / AMD Overclocking Guide / Power Supply Guide SSD Reliability/Write Endurance / JOIN THE BENCHING TEAM! / Bulldozer Overclocking Guide / Forum Etiquette Want to see your writing featured on the overclockers.com Front Page? PM me, I can help! "We have more information and more ways of accessing it than ever, yet seem increasingly less inclined to do so."- Michael Wilbon
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search