My 1st LN2 session - AMD Phenom II X6 1100T and AMD FX-8150

BeepBeep2 · 04-08-12, 01:57 PM

Thanks to I.M.O.G. for giving me this opportunity

Pay no attention to my HWBOT team

Test rigs:
AMD Phenom II X6 1100T and AMD FX-8150
2x Sapphire Vapor-X HD 5770
ASUS Crosshair V Formula
4GB GSkill Pi Series DDR3-2133 CL7 (PSC)
XFX Black Edition 850w (Seasonic M12 80+ Silver)
Intel X25-V G2 40GB
Windows XP Pro SP3 x86 / Windows 7 Pro x64
K|NGP|N Venom Rev 5.0 Universal mount
50L LN2

Benchmarks: (mixed, some I didn't have time/enough LN2 to run on either CPU)
CPU-Z
Memory Clock
Pifast
SuperPi 1M
wPrime 32M

3DMark05
3DMark06
3DMark Vantage
3DMark11

Photos: (I'll update with more later, these were from yesterday)

Results:

CPU-Z

1100T - 6524 MHz
http://valid.canardpc.com/show_oc.php?id=2323284

FX-8150 - 7253 MHz
http://valid.canardpc.com/show_oc.php?id=2324214

Memory Clock
FX-8150 + GSKill Pi 2133 CL7 = 1332.5 MHz, 2665 DDR
http://hwbot.org/submission/2272552_...ram_1332.5_mhz
http://valid.canardpc.com/show_oc.php?id=2324284

Pifast

FX-8150 - 22.68s - 6824 MHz
http://hwbot.org/submission/2272527_...8150_22.68_sec
http://img213.imageshack.us/img213/8...rimepifast.png

SuperPi 1M

1100T - 10.657s - 6466 MHz
http://hwbot.org/submission/2272286_...be_10sec_657ms

FX-8150 - 12.199s - 7143 MHz
http://hwbot.org/submission/2272534_...50_12sec_199ms

wPrime v1.55 32M

FX-8150 - 5.121s - 6824 MHz
http://img213.imageshack.us/img213/8...rimepifast.png

3DMark05

Single Card - 1050/1360 - 33228 - 121st
http://hwbot.org/submission/2272283_...70_33228_marks

3DMark06

Single Card - 1080/1380 - 21714 - 60th
http://hwbot.org/submission/2272277_...70_21714_marks

Dual Card - 1055/1365 - 33543 - 11th
http://hwbot.org/submission/2272287_...70_33543_marks

3DMark Vantage - Performance

Single Card - 1060/1365 - 14658 - 44th
http://hwbot.org/submission/2272540_...70_14658_marks

Dual Card - 1050/1365 - 24903 - 5th
http://hwbot.org/submission/2272548_...70_24903_marks

3DMark11

Single Card - 1055/1370 - 3467 - 30th
http://hwbot.org/submission/2272545_...770_3467_marks

Dual Card - 1030/1360 - 6205 - 6th
http://hwbot.org/submission/2266620_...770_6205_marks

OptyTrooper · 04-08-12, 02:43 PM

Nicely done.

TsunamiJuan · 04-08-12, 03:15 PM

Gratz

first ln2 runs are so much fun.

Did it get you hooked?

xsuperbgx · 04-08-12, 07:24 PM

Good work and congrats on taking the step to extreme cooling.

Also Welcome to OCF!
I have seen you at Xs, you seem to be very active over there. I am sure that we will see more good things from you.
I also see that you are in OH. Did you bench with IMOG? Those are not pics of his garage...

BeepBeep2 · 04-08-12, 08:48 PM

No, he lent me his 50L dewar, I benched in my house

I.M.O.G. · 04-10-12, 09:34 PM

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

TsunamiJuan · 04-10-12, 09:49 PM

Quote:

Originally Posted by I.M.O.G.

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

and a shirt that says "IMOG owns me" ?

I.M.O.G. · 04-10-12, 09:56 PM

Maybe not that far, but I do have some leftover Overclockers benching T's in his size.

BeepBeep2 · 04-11-12, 06:25 PM

I wouldn't mind that at all.

I just don't think I can switch hwbot teams though due to my loyalty @ XS :P

Otherwise I don't care who took points or even benching for points really. It is a hobby, while competitive it should be fun too

hokiealumnus · 04-11-12, 07:50 PM

Quote:

Originally Posted by BeepBeep2

I wouldn't mind that at all.

I just don't think I can switch hwbot teams though due to my loyalty @ XS :P

Otherwise I don't care who took points or even benching for points really. It is a hobby, while competitive it should be fun too

Shhh...they'll never know. Honda never looks in threads over here.

TsunamiJuan · 04-11-12, 07:52 PM

Quote:

Originally Posted by hokiealumnus

Shhh...they'll never know. Honda never looks in threads over here.

Only when you call his attention to it LOL

Janus67 · 04-11-12, 08:22 PM

Quote:

Originally Posted by I.M.O.G.

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

You know that I'd be there! Or you can set it up for the one in cbus

Bobnova · 04-11-12, 08:35 PM

Quote:

Originally Posted by hokiealumnus

Shhh...they'll never know. Honda never looks in threads over here.

He's on the list for recruitmentization, too

I.M.O.G. · 04-11-12, 08:54 PM

Great Janus, glad I can count on you. With something easily going wrong, its a hard thing to do a live event by yourself - with two people, a lot easier to make sure something is running and talk to people, even if one of you are troubleshooting or prepping.

Could do Cbus, but I have the info for up here, I've talked to the guy (he knew about our St Louis event), and its only an hour from me so up here would be easiest probably to put together... I was going to do one for Bulldozer, but never got around to it, and it would have been more trouble than it is now. Now I have all the dewars I would need so its just a matter of driving over and having something cool to bench - IB should fit the bill.

Cbus is only 140 miles for me, but my truck gets 11mpg so that's a 100 bucks round trip at least until I get a tuneup. That doesn't mean it isn't possible, but maybe we could knock out Cleveland first and we can work on the contacts down there.

Janus67 · 04-11-12, 10:13 PM

Haha, fair enough. Sounds like a great time!

04-08-12, 01:57 PM	Thread Starter #1
BeepBeep2 Member Join Date: Apr 2012 Location: Barberton, OH	My 1st LN2 session - AMD Phenom II X6 1100T and AMD FX-8150 Thanks to I.M.O.G. for giving me this opportunity Pay no attention to my HWBOT team Test rigs: AMD Phenom II X6 1100T and AMD FX-8150 2x Sapphire Vapor-X HD 5770 ASUS Crosshair V Formula 4GB GSkill Pi Series DDR3-2133 CL7 (PSC) XFX Black Edition 850w (Seasonic M12 80+ Silver) Intel X25-V G2 40GB Windows XP Pro SP3 x86 / Windows 7 Pro x64 K\|NGP\|N Venom Rev 5.0 Universal mount 50L LN2 Benchmarks: (mixed, some I didn't have time/enough LN2 to run on either CPU) CPU-Z Memory Clock Pifast SuperPi 1M wPrime 32M 3DMark05 3DMark06 3DMark Vantage 3DMark11 Photos: (I'll update with more later, these were from yesterday) Results: CPU-Z 1100T - 6524 MHz http://valid.canardpc.com/show_oc.php?id=2323284 FX-8150 - 7253 MHz http://valid.canardpc.com/show_oc.php?id=2324214 Memory Clock FX-8150 + GSKill Pi 2133 CL7 = 1332.5 MHz, 2665 DDR http://hwbot.org/submission/2272552_...ram_1332.5_mhz http://valid.canardpc.com/show_oc.php?id=2324284 Pifast FX-8150 - 22.68s - 6824 MHz http://hwbot.org/submission/2272527_...8150_22.68_sec http://img213.imageshack.us/img213/8...rimepifast.png SuperPi 1M 1100T - 10.657s - 6466 MHz http://hwbot.org/submission/2272286_...be_10sec_657ms FX-8150 - 12.199s - 7143 MHz http://hwbot.org/submission/2272534_...50_12sec_199ms wPrime v1.55 32M FX-8150 - 5.121s - 6824 MHz http://img213.imageshack.us/img213/8...rimepifast.png 3DMark05 Single Card - 1050/1360 - 33228 - 121st http://hwbot.org/submission/2272283_...70_33228_marks 3DMark06 Single Card - 1080/1380 - 21714 - 60th http://hwbot.org/submission/2272277_...70_21714_marks Dual Card - 1055/1365 - 33543 - 11th http://hwbot.org/submission/2272287_...70_33543_marks 3DMark Vantage - Performance Single Card - 1060/1365 - 14658 - 44th http://hwbot.org/submission/2272540_...70_14658_marks Dual Card - 1050/1365 - 24903 - 5th http://hwbot.org/submission/2272548_...70_24903_marks 3DMark11 Single Card - 1055/1370 - 3467 - 30th http://hwbot.org/submission/2272545_...770_3467_marks Dual Card - 1030/1360 - 6205 - 6th http://hwbot.org/submission/2266620_...770_6205_marks Last edited by BeepBeep2; 04-08-12 at 02:05 PM.
	QUOTE Thanks

04-08-12, 02:43 PM	#2
OptyTrooper Member Join Date: Feb 2010 Location: Missouri	Nicely done. __________________ If it ain't broke let me take a crack at it. "I must not fear. Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain." Bobnova: "I suspect OptyTrooper of being a masochist."
	QUOTE Thanks

04-08-12, 03:15 PM	#3
TsunamiJuan Member Join Date: Mar 2011 Location: Soviet Mexico	Gratz first ln2 runs are so much fun. Did it get you hooked? __________________ Get the hot dogs out, this baby's going up in Flames!!! Keeper Of The VaseAtone™ Bobnova: humans need SMART functionality Deanzo: Matts hat is too high a res for the video feed, that is the issue Currently Doing Stupid OC tricks with A10 5800k @ A85X chipset Asus M4N82 nforce980a mb, Phenom II 940 be @ 6000.1mhz (Bobnova'd) , 4gb DDR2 1066 Gigabyte a75-ud4h , 3870k @ 6016.7mhz, 2.358vcore Asus MIVE, i7 2600k @ 5899.7mhz Benching Rig RIP Died doing what it did best ASUS MIVE, i7 2600k @ 5.2ghz 1.49vcore, noctua NH-D14 2000 AMD e350 Cold Fusion - IceCream Special Ln2 Pot (the most fun you can have 130$ and ln2)
	QUOTE Thanks

04-08-12, 07:24 PM	#4
xsuperbgx Benching Team Leader Join Date: Dec 2006 Location: Ut.	Good work and congrats on taking the step to extreme cooling. Also Welcome to OCF! I have seen you at Xs, you seem to be very active over there. I am sure that we will see more good things from you. I also see that you are in OH. Did you bench with IMOG? Those are not pics of his garage... __________________ Come join in on the benching fun! Competitions, contests, prizes. + Learn tips and tricks to get a better score. Benching:3570K.................................................. ......................................... Asus Rampage V Gene.................................................. ......................................Join us in the "OVERCLOCKTAGON"!!! Gaming: Intel 2500K...............................Htpc: Silverstone GD05B HD7970.................................................Pentium G840 Z68X-UD3H-B3.......................................H67M-D2-B3 Vertex 3..................................................Hd5450, Lenovo N5902 heat..................................................BF3/origin= Circling_Urubu
	QUOTE Thanks

04-08-12, 08:48 PM	Thread Starter #5
BeepBeep2 Member Join Date: Apr 2012 Location: Barberton, OH	No, he lent me his 50L dewar, I benched in my house
	QUOTE Thanks

My 1st LN2 session - AMD Phenom II X6 1100T and AMD FX-8150

Internet Services

Website Development

Tech Hardware

04-10-12, 09:34 PM	#6
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons. I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth. Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

04-10-12, 09:56 PM	#8
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Maybe not that far, but I do have some leftover Overclockers benching T's in his size. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

04-11-12, 06:25 PM	Thread Starter #9
BeepBeep2 Member Join Date: Apr 2012 Location: Barberton, OH	I wouldn't mind that at all. I just don't think I can switch hwbot teams though due to my loyalty @ XS :P Otherwise I don't care who took points or even benching for points really. It is a hobby, while competitive it should be fun too
	QUOTE Thanks

04-11-12, 08:54 PM	#14
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Great Janus, glad I can count on you. With something easily going wrong, its a hard thing to do a live event by yourself - with two people, a lot easier to make sure something is running and talk to people, even if one of you are troubleshooting or prepping. Could do Cbus, but I have the info for up here, I've talked to the guy (he knew about our St Louis event), and its only an hour from me so up here would be easiest probably to put together... I was going to do one for Bulldozer, but never got around to it, and it would have been more trouble than it is now. Now I have all the dewars I would need so its just a matter of driving over and having something cool to bench - IB should fit the bill. Cbus is only 140 miles for me, but my truck gets 11mpg so that's a 100 bucks round trip at least until I get a tuneup. That doesn't mean it isn't possible, but maybe we could knock out Cleveland first and we can work on the contacts down there. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

04-11-12, 10:13 PM	#15
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	Haha, fair enough. Sounds like a great time! __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search