Cant OC

lilg_06 · 04-10-12, 08:03 PM

What vcore did you set in the bios?

itsahemi · 04-10-12, 08:05 PM

1.35 I'm going to try a lower LLC

lilg_06 · 04-10-12, 08:06 PM

Yes, drop the LLC by one level, check the voltages, try find the LLC which maintains your vcore. The correct LLC setting will be different for every board and chip.

itsahemi · 04-10-12, 08:08 PM

Ok testing now. Thanks for all the help so far though guys.

itsahemi · 04-10-12, 08:10 PM

Ok got it it's 4 LLC. Holding at 1.356.

Cojac92 · 04-10-12, 08:12 PM

Quote:

Originally Posted by itsahemi

Ok got it it's 4 LLC. Holding at 1.356.

At 4400MHz?

itsahemi · 04-10-12, 08:12 PM

Maybe not it just randomly dropped to 1.344. Why it do that?

itsahemi · 04-10-12, 08:16 PM

Ok at 5 LLC my volts sit at 1.368 and then with prime to 1.392 volts

lilg_06 · 04-10-12, 08:17 PM

Was the system unstable at LLC level 4? If not, then there is no need to turn up the LLC just yet....

itsahemi · 04-10-12, 08:19 PM

Yeah when it drops below 1.35 it crashes so when it dropped out of nowhere it crashed. Should I try it at 4 again? Or why is it dropping like that?

lilg_06 · 04-10-12, 08:23 PM

1.392V at load on prime is too high for a 44x multiplier.
Set your vcore to 1.325v in the bios, and set your llc to level 6, report back with Idle and Load voltages, they should both be higher than the vcore in your bios.
I know we are reducing the vcore now, but we are increasing LLC to counter the lower voltage. Let me know what voltages you get.

Cojac92 · 04-10-12, 08:23 PM

Quote:

Originally Posted by itsahemi

Yeah when it drops below 1.35 it crashes so when it dropped out of nowhere it crashed. Should I try it at 4 again? Or why is it dropping like that?

What were your temps? Maybe it was a form of thermal throttling?

lilg_06 · 04-10-12, 08:25 PM

yep, check your temps too

itsahemi · 04-10-12, 08:25 PM

My temps are 60 with LLC at 5 and ok I will try it lilg. Bit why is my vcore fluctuating still? Even with it at LLC 5 it went from 1.392-1.380 then back up. Why is that?

lilg_06 · 04-10-12, 08:28 PM

The voltage will always fluctuate, LLC will only minimise the fluctuation and prevent it from falling below a certain voltage that you are trying to keep it above, small fluctuations above your required vcore is not a problem, its a problem when the vcore drops below that which you require for stability.

itsahemi · 04-10-12, 08:28 PM

Alright lilg idle volts 1.356 load volts 1.392 still

lilg_06 · 04-10-12, 08:32 PM

Drop LLC down to level 5, we need to make it so that with LLC the voltage on load is around 1.35V, anything between 1.00-1.35 at idle will be fine, so don't worry about idle voltages. If the voltage is too high at level 5, drop down another level, repeat till you find a stable setting, report back...

itsahemi · 04-10-12, 08:41 PM

Ok LLC level 5 vcore 1.310 holds my voltage at load 1.356

lilg_06 · 04-10-12, 08:42 PM

Okay, what about stability?

itsahemi · 04-10-12, 08:43 PM

Ok some more good news it dropped to 1.344 and it didn't crash but it made me crap my pants lol

04-10-12, 08:03 PM	#81
lilg_06 Member Join Date: Apr 2012 Location: London - England	What vcore did you set in the bios? __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:05 PM	Thread Starter #82
itsahemi Registered Join Date: Apr 2012	1.35 I'm going to try a lower LLC
	QUOTE Thanks

04-10-12, 08:06 PM	#83
lilg_06 Member Join Date: Apr 2012 Location: London - England	Yes, drop the LLC by one level, check the voltages, try find the LLC which maintains your vcore. The correct LLC setting will be different for every board and chip. __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:08 PM	Thread Starter #84
itsahemi Registered Join Date: Apr 2012	Ok testing now. Thanks for all the help so far though guys.
	QUOTE Thanks

04-10-12, 08:10 PM	Thread Starter #85
itsahemi Registered Join Date: Apr 2012	Ok got it it's 4 LLC. Holding at 1.356.
	QUOTE Thanks

Cant OC

Internet Services

Website Development

Tech Hardware

04-10-12, 08:12 PM	Thread Starter #87
itsahemi Registered Join Date: Apr 2012	Maybe not it just randomly dropped to 1.344. Why it do that?
	QUOTE Thanks

04-10-12, 08:16 PM	Thread Starter #88
itsahemi Registered Join Date: Apr 2012	Ok at 5 LLC my volts sit at 1.368 and then with prime to 1.392 volts
	QUOTE Thanks

04-10-12, 08:17 PM	#89
lilg_06 Member Join Date: Apr 2012 Location: London - England	Was the system unstable at LLC level 4? If not, then there is no need to turn up the LLC just yet.... __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:19 PM	Thread Starter #90
itsahemi Registered Join Date: Apr 2012	Yeah when it drops below 1.35 it crashes so when it dropped out of nowhere it crashed. Should I try it at 4 again? Or why is it dropping like that?
	QUOTE Thanks

04-10-12, 08:23 PM	#91
lilg_06 Member Join Date: Apr 2012 Location: London - England	1.392V at load on prime is too high for a 44x multiplier. Set your vcore to 1.325v in the bios, and set your llc to level 6, report back with Idle and Load voltages, they should both be higher than the vcore in your bios. I know we are reducing the vcore now, but we are increasing LLC to counter the lower voltage. Let me know what voltages you get. __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:25 PM	#93
lilg_06 Member Join Date: Apr 2012 Location: London - England	yep, check your temps too __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:25 PM	Thread Starter #94
itsahemi Registered Join Date: Apr 2012	My temps are 60 with LLC at 5 and ok I will try it lilg. Bit why is my vcore fluctuating still? Even with it at LLC 5 it went from 1.392-1.380 then back up. Why is that?
	QUOTE Thanks

04-10-12, 08:28 PM	#95
lilg_06 Member Join Date: Apr 2012 Location: London - England	The voltage will always fluctuate, LLC will only minimise the fluctuation and prevent it from falling below a certain voltage that you are trying to keep it above, small fluctuations above your required vcore is not a problem, its a problem when the vcore drops below that which you require for stability. __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:28 PM	Thread Starter #96
itsahemi Registered Join Date: Apr 2012	Alright lilg idle volts 1.356 load volts 1.392 still
	QUOTE Thanks

04-10-12, 08:32 PM	#97
lilg_06 Member Join Date: Apr 2012 Location: London - England	Drop LLC down to level 5, we need to make it so that with LLC the voltage on load is around 1.35V, anything between 1.00-1.35 at idle will be fine, so don't worry about idle voltages. If the voltage is too high at level 5, drop down another level, repeat till you find a stable setting, report back... __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:41 PM	Thread Starter #98
itsahemi Registered Join Date: Apr 2012	Ok LLC level 5 vcore 1.310 holds my voltage at load 1.356
	QUOTE Thanks

04-10-12, 08:42 PM	#99
lilg_06 Member Join Date: Apr 2012 Location: London - England	Okay, what about stability? __________________ CPU: i5 2500k 4.7GHz @1.42V Cooling: Noctua NH-D14 RAM: 8GB Corsair XMS3 Kit @ 1.5V 1600MHz 9,9,9,24,2T Motherboard: Asus Maximum Gene V Z77 Chipset GPU: EVGA GTX 570 HD 1280MB HD: Samsung Spinpoint F3 1TB PSU: Fractal Design Newton R2 1000W Modular Case: Fractal Design Define Mini
	QUOTE Thanks

04-10-12, 08:43 PM	Thread Starter #100
itsahemi Registered Join Date: Apr 2012	Ok some more good news it dropped to 1.344 and it didn't crash but it made me crap my pants lol
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search