3770K@5700 GIGABYTE Z77X-UD3H DICE OVERCLOCKING BENCHMARKS

TURN & BURN · 04-23-12, 02:35 AM

seems I'm having some issues loading some picks will fix a bit laterZZZZZZZZZZZZZZ

Today the NDA is lifted Thank GOD!!!! So lets get busy.....

Working with the Gigabyte Z77 UD3H and a 3770K on Dice

I want to say that Gigabyte has come full circle, the bottom line Z77 series board preformed flawless

With the 3770K on Dice I did run into a minor cold bug at temps below -68c. Once booted and running however no issues going colder just dont freeze up and have to reboot, this was a issue for my chip I would have to wait for the temps to drop down a bit before I could get going again or start from stock and work up, other than that the 3770K ran very well with a noted improvement over the SB. The chip does seem to get very hot at upper speeds so I recomed good cooling for high end Overclocking unless you have a very good chip!

The Gigabyte board I cant say enough about as all the past bugs have been delt with and I see them emerging as a top player again without issues, the board overclocks easy and all you need in adjusments including to go to 3600MHz memory. I recomend this board as it is priced well and any user will overclock very well with it.

Being a bencher time for the show!

System
GIGABYTE Z77X-UD3H
3700K@5700
COOLING DICE
1X7970 OC 1171/1577 AIR
OCZ 120GB VERTEX 3
CORSAIR 1050W PS

System Picks
Jelly up not a pretty sight!!

Now for some benching with 1x7970 a slight OC.

HAVEN

06 MARKS

3D VANTAGE

WPRIME

32M

1024M

This is a regular Chipper nothing special
Will be running 2x7970's and have a second chip to test out.

T&B

Janus67 · 04-23-12, 05:59 AM

Could you not go past 5700? Or was that just an ready overclock got the chip? After setting a lot of result on the bot they seem to be above the 6GHz mark

LoganG · 04-23-12, 06:06 AM

I'm confused, doesn't the CPU-z verification show him running 6001?

xsuperbgx · 04-23-12, 07:15 AM

I wonder how much dice is holding you back? Do you think LN2 could go further?

EarthDog · 04-23-12, 07:24 AM

Im a little bit saddened at the 5.7Ghz # under DI though. Was hoping 6Ghz+ was benchable under DI.

TURN & BURN · 04-23-12, 11:20 AM

Like I said this is a plane jane chip and on SS it ran 5.4 However I did notice on dice that below -68 or so if you loose the boot a cold bug seemed to take effect so I would have to clear the bios and start over to get it back up. I have seen chips go in the 6.4 range on LN2 and as high as 6.7 how benchable at them speeds??

I will be trying another session in about a hour with 2x 7970's and have a another chip and MSI GD65 ready to go as well.

T&B

I.M.O.G. · 04-23-12, 11:28 AM

Thanks for sharing, looking forward to seeing more results from you!

Janus67 · 04-23-12, 11:45 AM

Yep I can't wait to see how they perform. Strange that you are running into CB/CBB issues as it appears that a lot of the results seem to be frosty enough that no CB would be present.

EarthDog · 04-23-12, 11:47 AM

Maybe its just in the board and not the CPU?

TURN & BURN · 04-23-12, 12:13 PM

Quote:

Originally Posted by EarthDog

Maybe its just in the board and not the CPU?

We run 2 card benching with the Gig board
T&B

Eldonko · 04-23-12, 12:33 PM

Dont think that is gunna happen. Max I can do with SS is 5650 and I have to drop quite a bit to bench 3D. You really need LN2 for 6G+. Too much heat.

Quote:

Originally Posted by EarthDog

Im a little bit saddened at the 5.7Ghz # under DI though. Was hoping 6Ghz+ was benchable under DI.

TURN & BURN · 04-23-12, 01:20 PM

Quote:

Originally Posted by Eldonko

Dont think that is gunna happen. Max I can do with SS is 5650 and I have to drop quite a bit to bench 3D. You really need LN2 for 6G+. Too much heat.

The heat comes in at about the 5.4 range so unless you have a very acceptional chip or LN2 6GHz and up will be tough on dice. SS 3D I was able to do the same about and my SS is feeling its days now.

But then again I have put chips on different board and was able to get more out of them so after the Gigabyte runs I will run the MSI board.

T&B

I.M.O.G. · 04-23-12, 01:26 PM

What is your SS rated for? Wattage/temps?

What would you say is a good 24/7 OC on air/water from your experience?

Janus67 · 04-23-12, 01:26 PM

Quote:

Originally Posted by TURN & BURN

The heat comes in at about the 5.4 range so unless you have a very acceptional chip or LN2 6GHz and up will be tough on dice. SS 3D I was able to do the same about and my SS is feeling its days now.

But then again I have put chips on different board and was able to get more out of them so after the Gigabyte runs I will run the MSI board.

T&B

Sounds like you need a cascade setup

TURN & BURN · 04-23-12, 01:31 PM

Quote:

Originally Posted by Janus67

Sounds like you need a cascade setup

yeah the cascade is up north at my other place may need to freight it down!! but more cold the better can go LN2 next

T&B

OH my SS was a SDumper Cooler Xpress but was -56 at the head now -48 I was going to ship it back to him bought it like 4 years ago and was a very exeptional SS held temps under huge loads! now it needs some HELP........

T&B

Eldonko · 04-23-12, 02:25 PM

I have a custom H20 setup with 2 double heatercores and 4.8Ghz @ 1.375v gives 90C loaded. I can go higher but the heat is stupid. Dont think many are going to see 5Ghz on these chips with any stability w/ air/water. I would guess most chips will run 4.6-4.8 for 24/7.

I should add this estimation is from my own experience and what Ive seen of these chips thus far. You never know when retail chips hit the masses.

Quote:

Originally Posted by I.M.O.G.

What would you say is a good 24/7 OC on air/water from your experience?

TURN & BURN · 04-23-12, 04:01 PM

Quote:

Originally Posted by Eldonko

I have a custom H20 setup with 2 double heatercores and 4.8Ghz @ 1.375v gives 90C loaded. I can go higher but the heat is stupid. Dont think many are going to see 5Ghz on these chips with any stability w/ air/water. I would guess most chips will run 4.6-4.8 for 24/7.

I should add this estimation is from my own experience and what Ive seen of these chips thus far. You never know when retail chips hit the masses.

I did AIR runs at 5GHZ? you should have no issue there! Ill see if I can find them

T&B

Eldonko · 04-23-12, 04:47 PM

Air runs of what? If you were stress testing you would be seeing 100C

TURN & BURN · 04-23-12, 05:47 PM

Quote:

Originally Posted by Eldonko

Air runs of what? If you were stress testing you would be seeing 100C

I'm sure i remember themps hitting around mid 70's but I will have to check as I just loaded my air heatsink on a X79 system, so dont have it to do runs with anymore.

What Mobo are you using?

Thanks
T&B

Eldonko · 04-23-12, 05:57 PM

I dont see how an IVB at 5Ghz on air cooling could give a load of 70C. Do you mean you ran some benches at 5Ghz or you ran stress tests like aida64, prime, linx or similar?

Im using a custom h20 setup, aida64 stability test, real temp (the new version), and Max V Gene and I see 90C at 4.8. There could be differences in chips but from my experience these things are insanely hot past about 4.7Ghz.

04-23-12, 02:35 AM	Thread Starter #1
TURN & BURN Member Join Date: Jan 2006 Location: Florida	3770K@5700 GIGABYTE Z77X-UD3H DICE OVERCLOCKING BENCHMARKS seems I'm having some issues loading some picks will fix a bit laterZZZZZZZZZZZZZZ Today the NDA is lifted Thank GOD!!!! So lets get busy..... Working with the Gigabyte Z77 UD3H and a 3770K on Dice I want to say that Gigabyte has come full circle, the bottom line Z77 series board preformed flawless With the 3770K on Dice I did run into a minor cold bug at temps below -68c. Once booted and running however no issues going colder just dont freeze up and have to reboot, this was a issue for my chip I would have to wait for the temps to drop down a bit before I could get going again or start from stock and work up, other than that the 3770K ran very well with a noted improvement over the SB. The chip does seem to get very hot at upper speeds so I recomed good cooling for high end Overclocking unless you have a very good chip! The Gigabyte board I cant say enough about as all the past bugs have been delt with and I see them emerging as a top player again without issues, the board overclocks easy and all you need in adjusments including to go to 3600MHz memory. I recomend this board as it is priced well and any user will overclock very well with it. Being a bencher time for the show! System GIGABYTE Z77X-UD3H 3700K@5700 COOLING DICE 1X7970 OC 1171/1577 AIR OCZ 120GB VERTEX 3 CORSAIR 1050W PS System Picks Jelly up not a pretty sight!! Now for some benching with 1x7970 a slight OC. HAVEN 06 MARKS 3D VANTAGE WPRIME 32M 1024M This is a regular Chipper nothing special Will be running 2x7970's and have a second chip to test out. T&B __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller Last edited by TURN & BURN; 04-23-12 at 11:43 AM. Reason: Picture issues
	QUOTE Thanks

04-23-12, 05:59 AM	#2
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	Could you not go past 5700? Or was that just an ready overclock got the chip? After setting a lot of result on the bot they seem to be above the 6GHz mark Last edited by Janus67; 04-23-12 at 06:06 AM.
	QUOTE Thanks

04-23-12, 06:06 AM	#3
LoganG Join Date: Mar 2012 Location: NM, USA	I'm confused, doesn't the CPU-z verification show him running 6001? __________________ Biostar TA970EX \| AMD Fx-6100 @ 4000 MHz \| Cooler Master 212 \| 16GB Kingston HyperX 1600 \| ASUS HD7850 \| 120GB SanDisk Extreme SSD \| 240GB OCZ Vertex 3 SSD \| 640GB Hitachi HDD MSI 990FXA-GD65V2 \| AMD FX-8320 @ 4200MHz \| Corsair H100i \| 8GB Patriot Viper 3 1866 \| Sapphire 7870 \| 120GB Kingston HyperX SSD \| 240GB PNY SSD \| 1TB Seagate Barracuda HDD
	QUOTE Thanks

04-23-12, 07:15 AM	#4
xsuperbgx Benching Team Leader Join Date: Dec 2006 Location: Ut.	I wonder how much dice is holding you back? Do you think LN2 could go further? __________________ Come join in on the benching fun! Competitions, contests, prizes. + Learn tips and tricks to get a better score. Benching:3570K.................................................. ......................................... Asus Rampage V Gene.................................................. ......................................Join us in the "OVERCLOCKTAGON"!!! Gaming: Intel 2500K...............................Htpc: Silverstone GD05B HD7970.................................................Pentium G840 Z68X-UD3H-B3.......................................H67M-D2-B3 Vertex 3..................................................Hd5450, Lenovo N5902 heat..................................................BF3/origin= Circling_Urubu
	QUOTE Thanks

04-23-12, 07:24 AM	#5
EarthDog Senior PITA Member Overclockers.com Editor Join Date: Dec 2008 Location: Stuck in Maryland...	Im a little bit saddened at the 5.7Ghz # under DI though. Was hoping 6Ghz+ was benchable under DI. __________________ Should I R0 my SSD? / SandyBridge / Ivybridge Overclocking Guide / AMD Overclocking Guide / Power Supply Guide SSD Reliability/Write Endurance / JOIN THE BENCHING TEAM! / Bulldozer Overclocking Guide / Forum Etiquette Want to see your writing featured on the overclockers.com Front Page? PM me, I can help! "We have more information and more ways of accessing it than ever, yet seem increasingly less inclined to do so."- Michael Wilbon Last edited by thideras; 04-23-12 at 10:24 AM.
	QUOTE Thanks

3770K@5700 GIGABYTE Z77X-UD3H DICE OVERCLOCKING BENCHMARKS

Internet Services

Website Development

Tech Hardware

04-23-12, 11:20 AM	Thread Starter #6
TURN & BURN Member Join Date: Jan 2006 Location: Florida	Like I said this is a plane jane chip and on SS it ran 5.4 However I did notice on dice that below -68 or so if you loose the boot a cold bug seemed to take effect so I would have to clear the bios and start over to get it back up. I have seen chips go in the 6.4 range on LN2 and as high as 6.7 how benchable at them speeds?? I will be trying another session in about a hour with 2x 7970's and have a another chip and MSI GD65 ready to go as well. T&B __________________ Gig Z77A-UD5H / MSI Z77A- GD65 G1 Sniper / X79-UD3 / X79A MSI 65 (8D) Asus R4 Formula 3930/2x 3820 / 2700k / 5x 3770K IB 2x 7970 LT MSI - 2X 7970 OC Gigabytes 1x LT 680 4X120 SSD OCZ 22NM Team Extreme 2400MHz & 2600Mhz 1200w Corsair AX + Corsair 1050w + XFX 1250w DVD/BR/RW[/COLOR] LN2 - Cooler Express Chiller Last edited by TURN & BURN; 04-23-12 at 11:42 AM.
	QUOTE Thanks

04-23-12, 11:28 AM	#7
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	Thanks for sharing, looking forward to seeing more results from you! __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

04-23-12, 11:45 AM	#8
Janus67 Benching Team Leader Wannabe Admin Senior Join Date: May 2005 Location: Ohio State	Yep I can't wait to see how they perform. Strange that you are running into CB/CBB issues as it appears that a lot of the results seem to be frosty enough that no CB would be present. __________________ Ivy Bridge Benching and Gaming: Asus Maximus V Extreme 0010 BIOS : Intel i7 3770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI 7970 Lightning Edition Other Benched Hardware: GA-EX58a-UD3R; Rampage Extreme; Rampage Formula; GA-EP45-UD3R; P5K-Deluxe; MIVE -- 2500k; 2600k; 920; E6300; E6550; E6600; E8400; Q6600 -- 6950; 4870; 8800GTS Other Components: Crucial M4 128GB SSD : 2x1TB Samsung F3 in Raid0 : Silverstone Strider Gold 1250W : Auria EQ276W 27'' & Dell 2407FPW : KPC Tek9 Fat and Gemini LN2 Pots Benchmark, Win Prizes - In the Overclocktagon!
	QUOTE Thanks

04-23-12, 11:47 AM	#9
EarthDog Senior PITA Member Overclockers.com Editor Join Date: Dec 2008 Location: Stuck in Maryland...	Maybe its just in the board and not the CPU? __________________ Should I R0 my SSD? / SandyBridge / Ivybridge Overclocking Guide / AMD Overclocking Guide / Power Supply Guide SSD Reliability/Write Endurance / JOIN THE BENCHING TEAM! / Bulldozer Overclocking Guide / Forum Etiquette Want to see your writing featured on the overclockers.com Front Page? PM me, I can help! "We have more information and more ways of accessing it than ever, yet seem increasingly less inclined to do so."- Michael Wilbon
	QUOTE Thanks

04-23-12, 01:26 PM	#13
I.M.O.G. Homeless Leader Join Date: Nov 2002 Location: Rootstown, OH	What is your SS rated for? Wattage/temps? What would you say is a good 24/7 OC on air/water from your experience? __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

04-23-12, 04:47 PM	#18
Eldonko Revolutionary Mule Join Date: Dec 2004 Location: Calgary, Alberta	Air runs of what? If you were stress testing you would be seeing 100C __________________ Motherboard Reviewer at Hardware Canucks Team OCX Bench Team Always lurking the motherboard section
	QUOTE Thanks

04-23-12, 05:57 PM	#20
Eldonko Revolutionary Mule Join Date: Dec 2004 Location: Calgary, Alberta	I dont see how an IVB at 5Ghz on air cooling could give a load of 70C. Do you mean you ran some benches at 5Ghz or you ran stress tests like aida64, prime, linx or similar? Im using a custom h20 setup, aida64 stability test, real temp (the new version), and Max V Gene and I see 90C at 4.8. There could be differences in chips but from my experience these things are insanely hot past about 4.7Ghz. __________________ Motherboard Reviewer at Hardware Canucks Team OCX Bench Team Always lurking the motherboard section
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search