SOLVED Need Help P5G41T-M LX3

T

TheSprunkGTA

New Member

Joined

Jul 30, 2013

• Jul 30, 2013

• #1

I Broke a little thing on my P5G41T-M LX3 motherboard with my srafciger.You can see in on the picture http://postimg.org/image/sg2o0scub/ will this board works normal without this little thing Thank you and sooory for bad english

 

S

Starrbuck

Disabled

Joined

Feb 19, 2012

• Aug 1, 2013

• #2

I don't know what that is, but likely the only way to be sure is to install it and test it.

 

Bobnova

Senior Member

​

Joined

May 10, 2009

• Aug 1, 2013

• #3

Can you read the writing on the bit that broke?
Should either be a single "0" or a three digit code.

It's a 0603 package resistor, the question is what value.
Odds are the board itself will boot and work fine, but it may lack sound, or it may lack sound from one of the two sources (front panel header, rear ports), or something else may not function.

 

OP

T

TheSprunkGTA

New Member

Joined

Jul 30, 2013

• Aug 1, 2013

• Thread Starter
• #4

number on that thing is 158

 

Bobnova

Senior Member

​

Joined

May 10, 2009

• Aug 1, 2013

• #5

Are you sure it's not 156? I ask because if its using the standard code 158 would be a 1.5 giga-ohm resistor, which seems unlikely. 156 would be a much more reasonable 15 mega-ohms.
I'd install the board and see if it works personally.

 

OP

T

TheSprunkGTA

New Member

Joined

Jul 30, 2013

• Aug 1, 2013

• Thread Starter
• #6

i Test The Board and its work perfect thank you for your answer

 

Bobnova

Senior Member

​

Joined

May 10, 2009

• Aug 1, 2013

• #7

Glad it works! If you ever run into a part of it that doesn't work we can revisit the broken off bit and see if we can figure out what it is.