Help with Cold Cathode

IRONMAN · 03-25-02, 09:36 PM

I purchased a 300mm(11.81")x4mm cathode with an inverter, and would like to know what kind of switch to get from an electronics store, and information on wiring them to my system.

Oni · 03-25-02, 10:55 PM

You need a little switch like this first (you can find them @ Home Depot for about $2.50). Then you split one of the wires going from the power source and wire it up to the proper place on the switch.

03-25-02, 09:36 PM	Thread Starter #1
IRONMAN Registered Join Date: Feb 2002 Location: Ohio	Help with Cold Cathode I purchased a 300mm(11.81")x4mm cathode with an inverter, and would like to know what kind of switch to get from an electronics store, and information on wiring them to my system.
	QUOTE Thanks

03-25-02, 10:55 PM	#2
Oni Oni-ni-Kanabō Ninja Hippo eater Moderator Join Date: Apr 2001 Location: St. Catharines, Ontario Canada	You need a little switch like this first (you can find them @ Home Depot for about $2.50). Then you split one of the wires going from the power source and wire it up to the proper place on the switch. __________________ Mama, put my guns in the ground. I can't shoot them anymore. On Indefinite Hiatus Asus P6T SE Intel i7 930 @ Stock 12GB Corsair DDR3 9-9-9-24 XFX Radeon 5830 @ Stock Corsair 750 Watt PSU
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Help with Cold Cathode

Internet Services

Website Development

Tech Hardware