Soltek Sl-75drv4

explorer · 03-29-02, 10:46 PM

Does anyone know how to adjust the vdimm on this board, it says that you can but I have not been able to find out how?

Thanks,
Explorer

DaddyB · 03-30-02, 10:41 PM

Do you have the user's manual? if so check out page 26. To change the memory voltage you have to move the jumper pins on JP1 and JP2 (just below the RAM slots and above the floppy cable connector). the default is both jumpers on pins 2 and 3 (2.5V), for 2.6V move the jumper on JP1 to pins 1 + 2 (not moving the one on JP2) and for 2.7V move the jumper on JP2 to pins 1 + 2 (with JP1 being set to pins 2 and 3). without a picture I think thats the best i can explain it. post back if you need more help...

explorer · 04-04-02, 08:03 PM

Thanks, I was an idiot for not actually looking at the board.

03-29-02, 10:46 PM	Thread Starter #1
explorer Member Join Date: Apr 2001 Location: Ohio	Soltek Sl-75drv4 Does anyone know how to adjust the vdimm on this board, it says that you can but I have not been able to find out how? Thanks, Explorer
	QUOTE Thanks

03-30-02, 10:41 PM	#2
DaddyB Member Join Date: Mar 2002 Location: Toronto, Canada	Do you have the user's manual? if so check out page 26. To change the memory voltage you have to move the jumper pins on JP1 and JP2 (just below the RAM slots and above the floppy cable connector). the default is both jumpers on pins 2 and 3 (2.5V), for 2.6V move the jumper on JP1 to pins 1 + 2 (not moving the one on JP2) and for 2.7V move the jumper on JP2 to pins 1 + 2 (with JP1 being set to pins 2 and 3). without a picture I think thats the best i can explain it. post back if you need more help... __________________ Mobile XP2500@2700MHz 208x13 @2.0V†††††††Dell Dimension 8100 P4 1.3 Abit NF7-S, 1024MB Corsair XMS3200††††††††††512MB PC800 RDRAM, T.B. Santa Cruz ATi Radeon X850XT, Klipsch PM 5.1†††††††††††AIW Radeon 9800, 17" Trinitron Dangerden RBX, 47c load, Dell 2005FPW†††††††Altec Lansing 4.1, THX certified
	QUOTE Thanks

04-04-02, 08:03 PM	Thread Starter #3
explorer Member Join Date: Apr 2001 Location: Ohio	Thanks, I was an idiot for not actually looking at the board.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Soltek Sl-75drv4

Internet Services

Website Development

Tech Hardware