Overclocking Results

BubbaJoeLouis · 04-08-02, 10:04 PM

Right On!

I got my Athalon 1.4GHz running at a smooth 1575. Not too hot either; only 35C. Attached is the MBM dash.

Would you please do a quick reply as to what speed you have your 1.4GHz running? Can I break the 1600 mark with water-cooling only?

Thanks for all your help,
BJL

RnPgrosz · 04-08-02, 10:07 PM

I'm not currently using a tbird 1.4 but your temps seem good so I would keep pushing and as long as nothing is holding you back ie. ram you should be able to hit 1600 pretty easily. Upping the vcore more could help also. Good Luck!

Hoot · 04-08-02, 10:11 PM

For sure it can with some of the new, hot clocking KT333 based motherboards paired up with some fast pc2700 ram and you wont have to run the vcore up too high either. It all gets down to how much you want to spend to get that inexpensive CPU up into the 1800s.

Hoot

stool · 04-08-02, 11:07 PM

Popped my 1.4 into an 8KHA+, air-cooled(Millenium Glaciator 2), and with absolutely no tweaking got to 1600 w/the multiplier. Just got it put together the other day, so I haven't even played with the FSB yet, so I am pretty encouraged about how far I can get.

04-08-02, 10:04 PM	Thread Starter #1
BubbaJoeLouis Registered Join Date: Oct 2001 Location: overclockerville	Overclocking Results Right On! I got my Athalon 1.4GHz running at a smooth 1575. Not too hot either; only 35C. Attached is the MBM dash. Would you please do a quick reply as to what speed you have your 1.4GHz running? Can I break the 1600 mark with water-cooling only? Thanks for all your help, BJL
	QUOTE Thanks

04-08-02, 10:07 PM	#2
RnPgrosz Member Join Date: Dec 2001 Location: NJ	I'm not currently using a tbird 1.4 but your temps seem good so I would keep pushing and as long as nothing is holding you back ie. ram you should be able to hit 1600 pretty easily. Upping the vcore more could help also. Good Luck!
	QUOTE Thanks

04-08-02, 10:11 PM	#3
Hoot Inactive Moderator Join Date: Feb 2001 Location: Twin Cities	For sure it can with some of the new, hot clocking KT333 based motherboards paired up with some fast pc2700 ram and you wont have to run the vcore up too high either. It all gets down to how much you want to spend to get that inexpensive CPU up into the 1800s. Hoot __________________ DFI LP UT NF4 Ultra-D 7.04-3 Bios A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore 2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77Vdimm Connect 3D x850xt 620/625(1250) 2x WD 36GB Raptors in Raid0 DIY Jet Impingement WB on CPU / Pipecap WB on GPU Shrouded Camaro Heater Core / Swiftech MCP655 Pump Antec P-160 Tower / Seasonic S12 600W PSU
	QUOTE Thanks

04-08-02, 11:07 PM	#4
stool Senior Member Join Date: Dec 2000 Location: Albany, NY	Popped my 1.4 into an 8KHA+, air-cooled(Millenium Glaciator 2), and with absolutely no tweaking got to 1600 w/the multiplier. Just got it put together the other day, so I haven't even played with the FSB yet, so I am pretty encouraged about how far I can get. __________________ My Heatware
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Overclocking Results

Internet Services

Website Development

Tech Hardware