XP333 problem installing any OS at 133

Hi All
I have a XP333 rev2.1 Athalon XP1600 OCZ DDR2700 256,
the mobo is jumpered at 133 with the cpu clk setting in bios at 133 I can't load any OS, all I can do is boot off a 98 startup disk, at the 100 setting no problem but I then have a 1250+ processor
which bits. Any ideas would be greatly appreciated!!!

Tom

Try changing fsb jumper to 100 thats what i had to do with my IWON'T xp333 to get the os to load also load default bios settings until os is loaded on hard drive

Id2950 is correct about installing the os; you need to set the FSB jumper to 100, load bios default settings and then install the os. Once that's done, you can remove the jumper entirely cause the bios will boot and run at whatever FSB you select within its range; I'm presently running my Iwont at 190FSB.