Some error when booting

velocicaur · 05-21-02, 03:33 PM

Hey all

Just put a new computer together...

Detecting IDE Devices, it took about 5 hrs to get it to detect CDROM, but it does not want to detect my hard drive...

When it does...

Secondary Master: 1C3uLp44AVV0w-p ' ' ' ' ' ' ' ' ' ' ' '

Secondary IDE channel no 80 conductor cable installed
secondary master hard disk fail

I tried two different IDE Cables, same thing?

(it took like 5 hrs before I got the CDROM to work, but hard drive just gave me this error at the same time, so I did something good

)

Any suggestions would be greatly appreciated

40 gig 7200 IBM hard drive (67 at new egg)
Refurb epox 8kha
samsung 52x cdrom

Thanks velo

parkan · 05-21-02, 05:10 PM

The cable is probably not the problem. Test the HDD with a different system.

ThePerfectCore · 05-21-02, 06:18 PM

Make sure that you have the jumpers set correctly - master for the HD, and slave for the CD-ROM.

Or, if those are the only two IDE devices in your system, you could give them each their own IDE channel.

velocicaur · 05-21-02, 06:37 PM

Yeah, they both have there own IDE channel... plugs are good... it doesn't pick it up though...

may have to rma it...

velo

05-21-02, 03:33 PM	Thread Starter #1
velocicaur Registered Join Date: Apr 2002	Some error when booting Hey all Just put a new computer together... Detecting IDE Devices, it took about 5 hrs to get it to detect CDROM, but it does not want to detect my hard drive... When it does... Secondary Master: 1C3uLp44AVV0w-p ' ' ' ' ' ' ' ' ' ' ' ' Secondary IDE channel no 80 conductor cable installed secondary master hard disk fail I tried two different IDE Cables, same thing? (it took like 5 hrs before I got the CDROM to work, but hard drive just gave me this error at the same time, so I did something good ) Any suggestions would be greatly appreciated 40 gig 7200 IBM hard drive (67 at new egg) Refurb epox 8kha samsung 52x cdrom Thanks velo
	QUOTE Thanks

05-21-02, 05:10 PM	#2
parkan Member Join Date: Aug 2001 Location: I am omnipresent	The cable is probably not the problem. Test the HDD with a different system.
	QUOTE Thanks

05-21-02, 06:18 PM	#3
ThePerfectCore Red Raccoon Dojo Join Date: Mar 2002 Location: Texas	Make sure that you have the jumpers set correctly - master for the HD, and slave for the CD-ROM. Or, if those are the only two IDE devices in your system, you could give them each their own IDE channel.
	QUOTE Thanks

05-21-02, 06:37 PM	Thread Starter #4
velocicaur Registered Join Date: Apr 2002	Yeah, they both have there own IDE channel... plugs are good... it doesn't pick it up though... may have to rma it... velo
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Some error when booting

Internet Services

Website Development

Tech Hardware