Today from Alphacool we get the chance to look at a very new product to the market, the Eiswand. This is a standalone watercooling kit with everything you need to get started! This kit is even friendly to those with small factor cases, as the radiator/pump/reservoir are all external and contained in one housing. Enough banter, let’s dig in and take a look at this kit!
Bringing in the tail-end of the newest AMD CPUs we have the Ryzen 3 lineup. This is AMD’s offering for the budget-minded PC user. Today we’ll be looking at the two quad-core offerings, the 1200 and 1300X. The 1300X has the XFR technology we’ve seen from the Ryzen 7 1800X, 1700X, and Ryzen 5 1500X/1600X allowing for boost speeds over their typical max. The 1200 is locked to its listed speeds, unless you’re overclocking. One major difference from the Ryzen 5 and Ryzen 7 CPUs is the exclusion of Simultaneous Multithreading (SMT) from the Ryzen 3 processors. While this does mean a performance hit for multithreaded applications, it also cuts the cost of the product making it accessible to more users. Let’s take a closer look at the lineup now.
Today’s newest victim for the torture table is GIGABYTE’s new Z270X-Gaming SOC, their flagship overclocking motherboard. This board has one job, and only one job, to be as fast as physically possible while pushing your CPU as far as possible. There’s notably fewer features than the Z170X-SOC Force, though, because GIGABYTE has gone back to the roots of the extreme overclocker with this board. If anything can handle the punishment, it’ll be this board.
Coming in swiftly behind big brother we have Ryzen 5. This is AMD’s offering for the more budget-minded PC user. Today we’ll be looking at the hex-core 1600X and the quad-core 1500X. These CPUs both have the XFR technology we’ve seen from the Ryzen 7 1800X and 1700X allowing for boost speeds over their typical max. Without further adieu, on to the main show.
Its new, its a flagship, its the NVIDIA GeForce GTX 1080 Ti. The only question about how fast this GPU will be is whether it will knock the Titan X Pascal off its throne. This is the base/reference design for all the GPU partners to base designs from (or design up from), so expect numbers to climb from what you see here today as new cards release!
It feels like it has been years since we’ve had an AMD CPU on hand for a review, because it has! The last part we saw was an APU back in 2014. Since those years ago, AMD has come out with a completely new architecture, moved to a 14nm process, gotten rid of those “modules” we’ve grown accustomed to, and are boasting a self-proclaimed 52% IPC gain over their previous CPU. Desktop processors now range from four cores without SMT (Simultaneous Multi-Threading) all the way up to eight cores with SMT. All of the processors have a vastly reduced TDP with the highest SKU coming in at 95W (just four watts higher than the i7-7700K). This is a huge improvement of the 220W the top Vishera CPU pulled down and the 125W of the FX-8580.
Today, specifically, we’ll be talking about the Ryzen 7 series, the flagship 1800X CPU in the lineup. IPC improvements are huge over Excavator, thread count is up (depending how you view modules the core count is up also), and I know all of us enthusiasts are excited to see the new challenger who has been looming. That said, enough from me, let’s get to the chip.
On the benching stand today is GIGABYTE’s new Z270X-Gaming 8, which comes in one step down from their gaming flagship. Everything, except the kitchen sink, was seemingly included with this motherboard. Integrated water cooling, dual Gigabit LAN, built-in Wi-Fi, and plenty more grace the Gaming 8. Let’s dig in to the details and see everything GIGABYTE brought to the table.
Never fear folks, I’m back again after a short break from reviews. Today I bring to the benching stand EVGA’s newest flagship motherboard, the Z270 Classified K. Loaded with features and ready to overclock, this motherboard should be a real winner for our community. Sit down, get comfy, it’s time to dig in.