1400mhz will only goto 1435 help

[paxoman]

Right my 1.400mhz (10.5*133)will only goto 1435(10.5*136)
temps r fine full load 43 and idol 30
will not go above 137 fsb help

 

[Despotes]

Try increasing your Vcore setting. Your manual should show you where the dip switch is for this. AS a rule, increasing the Vcore will increase system stability when oc'ing.

 

[Justy303]

Remember to watch the temperatures, if upping the vcore. Try some higher multiplier if your system can't deal with higher fsb.

 

[Rob Cork]

Paxoman, is that a typo for 'KT7-RAID' in your sig? Just wondered, cos you mention PC150 mem, not DDR, and I didn't think the KG7 was out yet available yet. Mind you, a KT7-RAID wouldn't do 133fsb, so that wouldn't make sense - KT7a-RAID maybe?

Anyway, as for your question - what PCI cards do you have? I suppose you might just be extremely unlucky and have a network card or something that doesn't like running at all out of spec. You could always try raising the multipler from 10.5 to 11, and just running 133MHz fsb - if your cpu can handle it, that'd give you 1466MHz. If that works, that'd suggest it's something other than the cpu holding you back.

 

[foggy]

I think i can solve your probs m8 !!!! i got an "exreme" from o/c uk and had the same probs,i sent my psu back and got a £35 refund against the 431 enermax they sell (ask for james the manager hes a really cool guy)now it overclocks easily and runs stable np m8.mail me if u get stuck for anything m8ty