SOLVED A7V-133 VIO

[Darkraist]

I have an A7V-133 and on page 21 of the manual it shows the default vio as 3.45, isnt the default for most things 3.3? And also there is a 'test mode' setting for the jumper?

 

[Goldwing]

Curious...the picture on mine shows the 3.45V as default the text above says "The default voltage (3.56V) should be used..."

Good question.

 

[Darkraist]

bump

 

[JRbob]

I think it is a typo in the manual because MBM shows my board at 3.54 for +3.3 with the jumper at default.