A7V133 Vcore setting in bios

[PDL]

I just got this board and it will not allow me to set the Vcore voltage in JumperFree mode. All jumpers are correct and I am able to select 1.7v in the list but every bootup shows 1.54v.
Anyone know why this would happen.
I went to Jumper mode but this only allows a limited selection on FSB.

 

[TranceBear]

dad (Jun 30, 2001 08:39 p.m.):
I just got this board and it will not allow me to set the Vcore voltage in JumperFree mode. All jumpers are correct and I am able to select 1.7v in the list but every bootup shows 1.54v.
Anyone know why this would happen.
I went to Jumper mode but this only allows a limited selection on FSB.

What are your specs? Like Motherboard?, Ram, and so on, this way we can help you alot better.

 

[robjustice]

Im looking for an article for you right now. It talked about the a7v-133 and the fact that the-voltage adjustment does not work correctly when changed in the bio's. It went on to say that with the a7v-133 use the jumper free for your clock and multiplier settings, but set your voltage by the jumpers.

 

[PDL]

Didn't know you could do that kind of combo, Jumperless & Vcore w/jumper!! I'll try it though!
System is:
Duron700@(constantly changing)
now at 800(133 * 6.0) 1.7Vcore
Enermax 350Watt Taisol Alum HSF
Temp @ 44c

I am wondering if there have been very many OCers who have gotted Durons to run stable at 133 FSB or higer?

 

[PDL]

That worked, robjustice!

Am now at 135 FSB and 1.7 Vcore.

Onward and Upward