Abit BE6-II max voltage fix?

[AD]

I can only go up tp 1.75 vcore on my BE6-II in the soft menu...is there a way to go higher? Do I need a bios update? TIA

 

[zPacKRat]

AD,
use an fc-pga chip on a slocket and raise the voltage on the slocket and from that setting you should be able to raise the voltage by .20 volts.

 

[AD]

So do jumper settings on the slotket override the soft fsb bios settings? What I mean is, if I put the jumper higher, am I fixed at that settting, or will my range of voltage selections in the bios be greater? Thanks -ad

 

[Mr B]

Your range in the BIOS will go higher, setting the jumpers on the slocket higher.

I've got the jumpers on my slocket set at 1.9v, and the up to +10% in the BIOS (2.5, 5, 7.5, 10%) gives me settings of 1.9, 1.95, 2.0, 2.05, 2.1 w/out opening the case.

I've got a Soyo 6BA+III, but the BE6 will work the same.

Mr B

 

[AD]

That was the answer I was looking for! thanks