ABIT BX6 REV 2 OVERVOLTING

[cesco]

Bye i'would like to know if it is possibile to have more then 1.90 volt core with my abitbx6 rev2.
I've cel633@952 but i want increase voltage to have more stability how can i do ??????
Thanks
Checco

 

[LutaWicasa]

This old trick worked fine for me. Go into bios and set your voltage max. Re-flash the bios using /sn/cc switches. Use F10 to exit flash prog and re-set to start. Go into bios and set everything up. You should now have options up to 2.1v, however on my board it will only use up to 2.05v. Anything over that and she does nothing

 

[QSW]

After re-flashing the BIOS, is it necessary to use the jumper to clear and reset the CMOS?

Thanks

 

[Tim-]

No. Using the /cc switch on the command line as described above, it will reset the cmos during the flash.

 

[cesco]

LutaWicasa (Mar 16, 2001 11:53 a.m.):
This old trick worked fine for me. Go into bios and set your voltage max. Re-flash the bios using /sn/cc switches. Use F10 to exit flash prog and re-set to start. Go into bios and set everything up. You should now have options up to 2.1v, however on my board it will only use up to 2.05v. Anything over that and she does nothing

Thanks for suggestion but i've tried and nothing happens. I used these tips with my old cel 300@501 but now it's impossibile to overvolt my abit.
Which is your bios version?
Thanks again
Ciao

 

[LutaWicasa]

It's still working for me. My bios ver. is QR. Last I checked, that's the latest.

 

[QSW]

YEAH! I just re-flashed the BIOS. Now my max voltage is 2.1V