• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Abit KT7-RAID Multiplier issues

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Jehosaphat

New Member
Joined
Jan 24, 2001
I just swapped out my A7V for the KT7-RAID. I have a T-Bird 850 which has been running at 997 (105 x 9.5) in my asus. Now in the Abit it runs fine at the 850 (8.5x100) but if i go to a multiplier of 9 its clocks at 700, 9.5...750, 10...800...etc Any ideas why this would be??? i can do 105 x 11.5 to achieve 997 but i shouldnt have too.
 
Could well be a problem with the bridges - I have experienced a similar problem with my duron which went away when I redid them. Just because the multiplier's successfully unlocked on one board doesn't seem to mean it'll work for another - if you've used pencil try a conductive pen or rear window defroster repair paint.
 
Redoing the Bridges fixed it, Thanx a million Rob, 997 again, time to try for 1 GHZ maybe better luck on this new MOBO.

THANX!!
 
Back