Abit KT7ARaid IDE sequence

[Tom]

I have the KT7AR with two drives setup as a RAID-0 drive.

However, on the ATA100 channels I have an IDE Zip and a removable
IDE drive that I use to transfer data back and forth to work.

How can I set the computer to assign the Raid channels to be drive C:
and the IDE channels to be scanned as D: and E:. I have the boot
preferences to boot to the Raid channels, but Win98 will still assign
the regular IDE drive as C: and won't boot from the RAID.

Tom

 

[Tom]

Never mind. I had to mark the partition on the RAID drives as active with
FDISK and it works now.

Tom