AMD Barton 2500+ Unlocked to Mobile need more help...

[MaxTem]

I unlocked my AMD 2500+ Barton to a AMD Mobile Athlon XP-M(Model 10) by connecting last 2 bridges on L5 (change it to Mobile M), cutting bridges on L6 (get max mutiplier of 15X). and cutting bridges on L8 and L11 for Voltage starup and max voltage. I used Abit Nf7 - S ver2 with BIOS 21. I am still can not get Xp to see it as a Mobile AMD to use the POWERNOW in AMD mobile CPU without it I am still can not change the multipier on the fly.
Anyone with same mobo and get it work please run WPCREDIT to get a copy of the HOST BRIDGE setting to get it work ...
The new UNLOCK barton is running at 180Mhz x 11 at 1.5V(MOBO) which equal to 1.275V(Mobile) stable with all torture tests I thrown at it (47C idle and 54C full load)
Here is a frew pictures of it

THANKS

 

[MaxTem]

It just got better at 38C idle

with the help of CPUidle Extreme my new UNLOCKED 2500+ Barton is very happy at 38C idle and 50C in full load. I still need help to get the winXP to see it as AMD Mobile CPU those. ANyone have any idea how? I am pretty sure it got something to do with POWERNOW, I ahve tried every ways and after reboot it still is a UNKNOWN CPU TYPE in winXP... Check out that Voltage it is running 1.425V in ABit NF7 - S

 

[bulk88]

Umm, as far as we know all NF2 MBs have Powernow disabled. An we don't know how to reenable it. You need to use a a Via DDR chipset or SIS chipset, also maybe a ATI chipset might do it (originally a mobile chipset).

 

[bulk88]

Also I did get the "supported" on. Everyone should take my word for it, I don't need screenshots to prove it unless it really is crazy. You can't feel good inside when you know you don't actually have that.

 

[neop]

so after modding to mp, it uses less vcore at the same clockspeed???

lower temps???

 

[bulk88]

so after modding to mp, it uses less vcore at the same clockspeed???

lower temps???

NO. The voltage stays the same.

 

[stamasd]

I can adjust the multiplier on the fly on my KT600 mobo, but I can't change the FSB from within Windows - but I'm not unhappy about the tradeoff.

 

[dippy_skoodlez]

Re: It just got better at 38C idle

with the help of CPUidle Extreme my new UNLOCKED 2500+ Barton is very happy at 38C idle and 50C in full load. I still need help to get the winXP to see it as AMD Mobile CPU those. ANyone have any idea how? I am pretty sure it got something to do with POWERNOW, I ahve tried every ways and after reboot it still is a UNKNOWN CPU TYPE in winXP... Check out that Voltage it is running 1.425V in ABit NF7 - S

Hey.. I have that same proggy.. why cant I access those options?!!!!

 

[__TRONIK__]

nope - at this point you cannot use the mobile trick to unlock a barton on an nforce2 board. You have to buy an actual mobile barton - like I just did