• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Anyone with MSI K7T Turbo-R running with a 133 FSB?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

ophidia

Registered
Joined
Mar 9, 2001
I just picked up a stick of PC133 to throw in and was wondering if anyone had had luck with setting the FSB to 133 on this board.
Any tips?
Thanks
 
I have a 1100 TBird running at 140 x 9.5 = 1330 with the B16 bios - I have PC150 memory. Don't forget the reset button after cold boot if your system doesn't come up.

Hinge out
 
I could only get it up to 6.5x144. No faster. I get better results with 100 FSB. It was worth a shot.
Thanks!
Chris
 
I believe most of the 133A boards hit the wall around 145 MHz FSB. A few might make it to 150MHz but from what I've read, the 133A chipset starts to struggle over 140 MHz.

Hinge out
 
I have no problem running at 11x133=1463 But if I try to run it at 11x134 it starts to get unstable. 38c under load
 
Back