• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Best place for water cooling gear?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

jchsatx09

Member
Joined
Jan 19, 2005
Location
Texas
I'm in the market for a Socket A water cooling system. I just want the water block, 12v DC pump, and an 80mm radiator. I particularly like the Swiftech line. So where's the best place to buy this stuff online?
 
www.cooltechinica.com - get a D-Tek WhiteWater CPU block, Aquaextreme50z 12v DC pump, and black ice micro (80mm) radiator (all with 1/2" fittings)


WhiteWater CPU Block:
http://www.cooltechnica.com/Merchan...OD&Product_Code=AQX-WW-AL-SA&Category_Code=WB

Aquaextreme 50z Pump:
http://www.cooltechnica.com/Merchan...ROD&Product_Code=AQX-50Z-DC12&Category_Code=P

BIM Radiator: http://www.cooltechnica.com/Merchan..._Code=BIMicro-CustomBarbs-BLK&Category_Code=R

then don't forget you need some tubing - i'd suggest clearflex60 1/2" ID x 3/4" OD, and then a t-line - you need a T-fitting and a fillport cap - all of this is available @ cooltechnica.com

Tubing:
http://www.cooltechnica.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=CF60&Category_Code=TAF


'T' Fitting:
http://www.cooltechnica.com/Merchan...&Product_Code=Tee_Connector&Category_Code=TAF

Fillport:
http://www.cooltechnica.com/Merchan...roduct_Code=Tee-Cap-Kit-BLK&Category_Code=Res

and then some stainless steel worm drive hose clamps from your local hardware store (1 for every barbed fitting - usually .50 to .90/ea. depending on size)


just my .02 for a WC system for you

-Justin
 
Last edited:
Sneaky said:
www.cooltechinica.com - get a D-Tek WhiteWater CPU block, Aquaextreme50z 12v DC pump, and black ice micro (80mm) radiator (all with 1/2" fittings)


WhiteWater CPU Block:
http://www.cooltechnica.com/Merchan...OD&Product_Code=AQX-WW-AL-SA&Category_Code=WB

Aquaextreme 50z Pump:
http://www.cooltechnica.com/Merchan...ROD&Product_Code=AQX-50Z-DC12&Category_Code=P

BIM Radiator: http://www.cooltechnica.com/Merchan..._Code=BIMicro-CustomBarbs-BLK&Category_Code=R

then don't forget you need some tubing - i'd suggest clearflex60 1/2" ID x 3/4" OD, and then a t-line - you need a T-fitting and a fillport cap - all of this is available @ cooltechnica.com

Tubing:
http://www.cooltechnica.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=CF60&Category_Code=TAF


'T' Fitting:
http://www.cooltechnica.com/Merchan...&Product_Code=Tee_Connector&Category_Code=TAF

Fillport:
http://www.cooltechnica.com/Merchan...roduct_Code=Tee-Cap-Kit-BLK&Category_Code=Res

and then some stainless steel worm drive hose clamps from your local hardware store (1 for every barbed fitting - usually .50 to .90/ea. depending on size)


just my .02 for a WC system for you



-Justin
Thanks for your post, very helpful.
 
Back