Bios 1010 doesn't work, why not?

[GosuWar]

I went to flash my bios w/ ez flash utility , and it says the bios does not match mine, why?

 

[Adamu]

Are you sure it's a bios for your motherboard model? Do you have it unzipped?

Check those and see if it solves your problem.

 

[HD man]

I had a similar problem when I tried to flash mine. I gave up. Does anyone know what the divisor is with the KT400 chip. I know the KT333 is 1/5 but can't find any info regarding the KT400

 

[Hoot]

I had a similar problem when I tried to flash mine. I gave up. Does anyone know what the divisor is with the KT400 chip. I know the KT333 is 1/5 but can't find any info regarding the KT400

With the current KT-400 motherboards, it is still 1/5. Too bad...


-EDIT-

I almost forgot to mention, I upgraded from 1008 to 1010 last night. Downloaded 1010.zip, extracted 1010.bin to a floppy, rebooted while holding ALT-F2, answered the prompts, powered down after the flash and reset the cmos, powered up and reselected my particular parameters and it worked. No significant (<1%) changes in Sisoft and 3DMK scores though.

Hoot