Breaking the 1 gig barrier

[MsNath]

I just managed to get my system rock stable at 1001mhz with my VP6 and singlePIII 700e under winME. Im sitting at 1.85 volts.

Im not sure how much I could back off the voltage. It took quite a bit to get me stable at 1001. I had to hit -1c before winME would load without register errors.

The fun part was that I got my system this cool with the stock fan and heat sink. <No mods at all> Well one kinda. If I can dig up a digital camera I will snaps some photos to show how I did this.

So the next question is do you know of any mods to get more juice out of this motherboard? If I had more core I think I could squeez a bit more out of this poor puppy

What do you think the max voltage on this CPU should be?

 

[Lucky]

Could u explain how u got to -1 with heatsink and fan i would love to read how u did this with a little bit of a mod maybe we all could to.

 

[Tim-]

Warning! You have broken the laws of thermodynamics- DANGER DANGER

It's not possible to be at -1c unless the ambient temperature is also -1c. A heatsink can NEVER be cooler than the air around it...

 

[MsNath]

Yes your very right. And I can assure you the ambient temp was well below 0c. Its something that really requiers a picture. Words just woudn't do it justice.

 

[marty]

Well we're all waiting to see what kind of ice box you have. Enquiring minds want to know.

 

[MsNath]

I'm just trying to scrounge up a digital camera. Give me a day or so. My secret to success is simply that I am Canadian and I have mother nature working on my side for 6 months out of the year. So don't expect anything fancy or revolutionary.

 

[Skywanker]

U shoud be able to run with a vcore @ 1.9
(i did!!) and push it op to 1050..

i'm only running 2x700E@[email protected],.... i need some good Ram.....

 

[MsNath]

Unfortunately my MB only goes to 1.85v. I need more juice! anyone know of a voltage mod for the vp6 to get the higher voltage?

Skywanker (Feb 21, 2001 05:49 p.m.):
U shoud be able to run with a vcore @ 1.9
(i did!!) and push it op to 1050..

i'm only running 2x700E@[email protected],.... i need some good Ram.....

 

[Ericsson]

you guys automatically believe that all temp readings are correct.

i suspect the hardware monitoring is not correct on this one...it's too unrealistic.

 

[Skywanker]

MsNath (Feb 21, 2001 11:33 p.m.):
Unfortunately my MB only goes to 1.85v. I need more juice! anyone know of a voltage mod for the vp6 to get the higher voltage?


Well my mobo is also vp6, and i have the option 1,9vcore in bios. can't remember my version. try opgrading your bios, it may help.
--------------------------------
My Specs.

2 x PIII-700E@933. idle@21c /full@37c w/acorp ???
384 MB Ram PC133, cas 3.
2 x 30 Gigs ibms @ Raid 0.
SB Live Value!
Plextor 12x/10x/32x Scsi.
NIC 10/100.
CD-ROM 32 slot-in.
Aopen HighTower.
2 x 80mm CaseFans.
Scsi card.
GF2MX 32mb @ 210/175.