I've got this legendary socket 939 motherboard DFI LANParty UT SLI-DR Expert chipset nForce4 SLI almost new only one SATA port is somewhat messed up missing those plastic parts from both sides , bought this baby really cheap ~ 55 $ from well known Romanian e-bay-like site okazii.ro , and I put it on my FX-60 dual core processor ( yeah , the most powerful unlocked socket 939 era processor! ) and some cheap KINGSTON value memory and tried to boot my rig.Here is my problem now:I know this board is working those 4 red diagnostic LEDS start 4,3,2 next only one left so no "4 LEDs of death" syndrome for me and the onboard speaker beeps only ONCE which I know is a good thing but after that I cannot enter BIOS to setup things as I need because Del key on my PS2 ( and I tried with USB keyboard , too ) keyboard is NOT working as it should do I press that key and the result is 0 nada nothing , first I see the boot logo from DFI after that I see these error messages "CMOS checksum error - defaults loaded , press F1 to continue or Del to enter setup" and when I press F1 sometimes I see this message "Verifying Pool Data and Backup CMOS OK!" and other times I see "Sil3114 SATA RAID Press Ctrl-S or F4 to enter RAID utility".One more thing to add is that I can actually use boot menu selection using Esc key to select HDD,CD-ROM or some other options like floppy disk or USB stick boot and the motherboard can actually boot using CD/DVD I already tried UBCD rescue CD and some Linux live distros to see if it's not a problem with my FX-60 processor and I'm happy that it is working well is all good no problem there actually I've seen it's name and working frequency ~ 2616 Mhz at POST screen so it cannot be defective or fryed and neither the mobo, please help me solve this little problem with my mobo.
Last edited:
