Hi,
I've changing the CMOS Battery 2032 3V with a fresh( checked with meter) one, checked working Dram and working Simms chips,(not at same time), working AGP card, working PCI video Cards, even a working ISA Paradise card. Checked jumper settings for a K6-2/333 CPU. Have set the following JP5 to 5 volts, JP8 to ATX Power9 I tried both AT & ATX, JP9 open, JP1 closed 3-4,5-6,7-8,9-10, JA25 B-C closed, JA26 B-C closed, JA27 B-C closed, J19 B-C closed on 1,2,3,and 4.
DO I HAVE TO DO SOMETHING TO THE PROGRAMABLE FLASH EEPROM BIOS to get the system to boot? All I get now is a herringbone effect on the monitor when I use the PCI or ISA cards and nothing with tha AGP card. I have a speaker connected and I hear NO SOUNDS. I am working with the bare board with nothing connected other than the CPU, Memory and Video Card.
PLEASE Tell Me WHAT I CAN DO NEXT.
Thank you.
I've changing the CMOS Battery 2032 3V with a fresh( checked with meter) one, checked working Dram and working Simms chips,(not at same time), working AGP card, working PCI video Cards, even a working ISA Paradise card. Checked jumper settings for a K6-2/333 CPU. Have set the following JP5 to 5 volts, JP8 to ATX Power9 I tried both AT & ATX, JP9 open, JP1 closed 3-4,5-6,7-8,9-10, JA25 B-C closed, JA26 B-C closed, JA27 B-C closed, J19 B-C closed on 1,2,3,and 4.
DO I HAVE TO DO SOMETHING TO THE PROGRAMABLE FLASH EEPROM BIOS to get the system to boot? All I get now is a herringbone effect on the monitor when I use the PCI or ISA cards and nothing with tha AGP card. I have a speaker connected and I hear NO SOUNDS. I am working with the bare board with nothing connected other than the CPU, Memory and Video Card.
PLEASE Tell Me WHAT I CAN DO NEXT.
Thank you.
