Change to FSB 100MHZ

[Hieu]

Hi,
My system is Celeron 433. I have changed the FSB to 83Mhz through BIOS and I got up to 541. It works fine, and 83Mhz is the max I can change in BIOS. I'm not happy with that speed so I decided to change to supported FSB 100Mhz on motherboard. But after changed, I cannot boot the system, it did not display anything.
Is there any solution for this, I realy want to pass 541

Thank you
H

 

[marty]

The likelihood is that going to 100 is beyond your chip's ability at least on that motherboard. To try to go to 100 you could increase the core voltage in very small increments (0.05 volts at a time) and/or use a better heat sink and fan arrangement.

If you don't want to spring for the extra money for the heatsink I wouldn't push the chip too far.

 

[Shadow ÒÓ]

Welcome to the Forums!

It's not necessary to post a question in more than one thread.

Shadow ÒÓ