chieftech rear 120mm mod

[R.Rabbit]

could i mod this case
http://www.directron.com/amx01bd.html
to have a 120mm fan or would have to just get 2 high flow 80's?
R.Rabbit

 

[Stedeman]

it might if you file the edge of the fan case (a 120 when butted against the io panel hits the edge of the case and is about 2mm over) but it wouldn’t look right up and down cause it cut for two 80mm // always try a blow hole

 

[EgeWorks]

A 120mm won't fit there, I tried, I ended up putting a single 92mm there, it just fits. But looking back I think two 80mm's would have been better.

 

[R.Rabbit]

k thanks

 

[masitti]

I fit two 92's in there - wasn't a perfect fit but they stayed there.

 

[The Spyder]

120 on the top and 120 in the front works GREAT dude!

 

[{PMS}fishy]

Im rocking 2 120mm in a push pull on my rad over the front of the case, and two enermax 80mm in the rear, I get great temps. There is no room or need for a 120mm on the back.